Overview
The Banks Power Ram-Air Intake System, part number GBE41843, is a short ram cold air intake for the 2018–2026 Jeep Wrangler (JL) and the 2020–2026 Jeep Gladiator. It has a fully enclosed molded plastic housing, a cotton gauze oil-type filter and an intake pipe made from high-density cross-linked polyethylene.
The Ram-Air design is intended to draw cooler air from outside the hot engine bay, which gives denser air at the throttle inlet. Tested airflow is 782 CFM, a gain of 82% over stock, and air density is 38% higher than the stock intake.
Cooler, denser air gives more thermal headroom before the engine reaches the fuel’s detonation limit, which can mean more power on hot days. The filter element uses 672 square inches of surface area, which is 21% more than the closest competing filter, so it can hold more dirt between cleanings.
Key features
- Short ram intake with a fully enclosed molded housing
- Big-Ass Filter element with 672 square inches of filter surface area
- Cotton gauze oil-type filter in red
- Multi-layer woven filter cloth that Banks says keeps fine dirt out of the intake
- The design was developed with computational fluid dynamics and tested on a flow bench, a dynamometer and on the road.
- Black intake pipe finish
- Inlet tube included
Protecting airflow on the trail
A short ram intake draws air through a sealed housing, so keeping that path clean matters as much as the filter itself. Trail dust and mud can reach the housing around the air inlet, so wipe the surrounding area before opening the box. Keep the mass airflow sensor area clean and avoid touching its element during service, since oil or debris on it can affect readings.
Wading and deep water are the main hazards for any intake that sits low in the engine bay. Stop after a crossing and check whether water or mud reached the filter or the pipe. Let everything dry before reinstalling the filter, and reoil it only when the cotton is fully dry. Hot days and heavy loads put extra demand on the intake path, so check the connections after long grades.
- Wipe the housing area before opening the box
- Check for water after deep crossings
- Keep the sensor element free of oil
Specifications
| Brand | Banks Power |
|---|---|
| Part number | GBE41843 |
| Intake system type | Short ram |
| Filter housing type | Full enclosure |
| Filter type | Oil |
| Air filter material | Cotton gauze |
| Air filter color | Red |
| Filter surface area | 672 square inches |
| Tested airflow | 782 CFM |
| Intake pipe material | High-density cross-linked polyethylene |
| Intake pipe color / finish | Black |
| Inlet tube | Included |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2020–2026 Jeep Gladiator in the Launch Edition, Overland, Rubicon, Sport and Sport S trims. It also fits the 2018–2026 Jeep Wrangler (JL) Rubicon, Sport and Sport S 2-door trims and the Unlimited Moab, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport and Unlimited Sport S 4-door trims.
Wrangler generations before the JL, including the JK (2007–2018), are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The enclosed housing and oiled cotton gauze filter need periodic cleaning and re-oiling to keep the filter working as designed. Work with the engine cool, because the intake sits near hot engine components.
What’s included
The inlet tube is included, along with the intake pipe, the enclosed housing and the Big-Ass Filter element described above.












