Overview
The K&N Filter 57-1566 is a 57 Series performance air intake kit for 2012–2015 Jeep Wrangler JK models with the 3.6L V6 engine. It replaces the factory air filter and air intake housing with a high-flow setup. The smoothed, straightened airflow lets the engine draw in more air with less effort.
The kit includes a chrome topped high-flow air filter and an embossed heat shield that mounts into the lower air box. A custom molded intake tube directs cooler, denser air to the throttle body. The oversized cone shaped filter can be used for up to 100,000 miles, depending on driving conditions.
Key features
- Replaces the factory air filter and air intake housing.
- Custom molded intake tube routes air into the throttle body.
- Embossed heat shield mounts into the lower air box as a cover.
- Tube accommodates the air temperature sensor and crank case vent hose.
- Chrome topped oversized cone filter that is washable and reusable.
- Up to 100,000 miles of use, depending on driving conditions.
- Installation usually takes 90 minutes or less using existing factory mounting points.
- Backed by K&N’s Million Mile Limited Warranty.
Before you buy
A cold air intake changes how the engine breathes, so the rest of the air path needs to seal properly. Before installing, check the intake clamps, the throttle body connection and the air box seal. A loose clamp or cracked seam can let unfiltered air reach the throttle body, which is why these joints are worth a look after the first few drives.
Heat shields and tubes near hot components should be inspected during routine maintenance for rubbing or heat marks. Filters also need attention: look for tears, and clean and re-oil the filter using the steps that come with it, especially after dusty trail use.
- Recheck clamps after the first few drives
- Inspect the air box seal for dust leaks
- Look for rubbing where the tube passes near the engine
- Clean the filter when it looks dusty or oily
- Confirm the heat shield fasteners stay tight
Specifications
| Brand | K&N Filter |
|---|---|
| Part number | 57-1566 |
| UPC | 24844363381 |
| Engine | 3.6L V6 |
| Intake type | Cold Air |
| Filter type | Oil |
| Filter housing type | Partial Enclosure |
| Inlet tube | Included |
| Fitment type | Direct Fit |
| Heat shield | K&N embossed, mounts into lower air box |
| Service interval | Up to 100,000 miles, depending on driving conditions |
| Legal status | 50 State Legal |
| CARB EO number | D-269-58 |
| Warranty | Million Mile Limited Warranty |
Vehicle fitment
It fits 2012–2015 Jeep Wrangler JK models, including the Rubicon, Sahara and Sport trims and the Unlimited Rubicon, Unlimited Sahara and Unlimited Sport trims. Confirm fit for your vehicle’s year, model and trim before ordering.
Other Wrangler generations, including the JL, and years outside 2012–2015 are not in K&N’s list for this kit. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The embossed heat shield mounts into the lower air box and acts as a cover for the intake. Tools needed are a screwdriver, a ratchet set and several wrenches, and the work usually takes 90 minutes or less using the existing factory mounting points.
What’s included
The kit includes the chrome topped high-flow air filter, the embossed heat shield and the custom molded intake tube.
















