Overview
The Artec Industries Flat Shock Tabs (Short) are steel shock tabs for standard shocks, sold as a pair. Shock tabs, also called shock mounts, give a fabricated suspension or frame a flat mounting point for a shock absorber. Artec Industries describes these as fabricator’s parts, made to look different from common tabs while staying strong and functional.
Each tab is CNC laser cut from 1/4-inch steel and has a 1/2-inch hole sized for standard shocks. The lower half is tapered to give more surface area for welding. Artec Industries offers the same tab in Short, Medium and Long lengths; this product is the Short version.
Key features
- CNC laser cut from 1/4-inch steel for high strength
- 1/2-inch hole for standard shocks
- Tapered bottom half adds surface area for welding
- Dimension from hole center to flat bottom is 1.125 inch
- Comes as a pair
- Available in Short, Medium and Long lengths
- Fabricator’s part designed to stand out on custom projects
Welding and fabrication notes
Shock tabs turn a shock mount into a welded flat plate, so the job is more about layout and fabrication than bolt-on fitting. Mark the hole center and the flat bottom on your frame or bracket first, then confirm the shock’s eye height and stroke before cutting any steel. A tab placed too low or too high can change the shock angle and bind at full travel.
Clean the mating surfaces to bare metal before tacking the tab, and use the tapered lower half for the weld bead rather than the hole edge. Heat from welding can warp thin frame steel, so tack opposite sides first and let the part cool between passes. After installation, inspect the welds and the hole for cracks after the first few trail runs, since repeated flex concentrates stress at the joint.
Specifications
| Brand | Artec Industries |
|---|---|
| UPC | 816791023674 |
| Material | Steel, 1/4 inch thick |
| Process | CNC laser cut |
| Hole size | 1/2 inch, for standard shocks |
| Dimension | 1.125 inch from center of hole to flat bottom |
| Length | Short |
| Quantity | Pair |
Vehicle fitment
Shock tabs depend on the shock’s length, the mounting location and frame clearance, so compatibility varies by build.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The tapered bottom half is made for welding, so mounting these tabs requires welding equipment and fabrication experience. Check the 1/2-inch hole against your shock’s mount and the 1.125 inch dimension against your mounting point before welding. Wear eye and hand protection when cutting or welding steel.
What’s included
A pair of Flat Shock Tabs, Short length.
Not included: Shock absorbers and mounting hardware are not included.








