Overview
The Crown Automotive J0805635 is a shock absorber bracket for the front or rear, driver or passenger side, and it includes a nylon lock nut. It fits Jeep CJ3, CJ5 and CJ6 models and Willys CJ-3, CJ-5 and CJ-6 models from 1949 to 1975.
This is a Crown replacement bracket for older Jeep CJ platforms. It is marked universal fit, but it fits only the CJ and Willys models above, so use the vehicle list as your guide.
Key features
- Bracket and nylon lock nut included
- Driver or passenger side, front or rear mounting
- Fits specific Jeep CJ and Willys CJ models
- Crown Automotive part number J0805635
Before you install
Shock brackets on older CJ frames take steady load from every bump, so the mounting point is worth a close look before it goes on. Clean the frame surface around the bracket, since rust or old paint can keep the new bracket from seating flat against the body.
Use the included nylon lock nut on the fastener it was packaged with, and avoid swapping in a nut that is not designed to lock. Inspect the shock bushing and eye hardware at the same time, because worn bushings change how the shock loads the bracket.
After the first few trail runs, look for hairline cracks around the welds and the mounting holes, and re-check the fasteners for tightness. Early detection keeps a small bracket problem from becoming a shock that drops off the frame.
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | J0805635 |
| UPC | 848399053791 |
| Position | Driver or passenger side, front or rear |
| Included | Bracket and nylon lock nut |
| Fitment tag | Universal fit |
Vehicle fitment
It fits the 1959 Jeep CJ3 Base, 1959–1975 Jeep CJ5 (Base, Renegade), 1959–1975 Jeep CJ6 (Base), and Willys CJ-3, CJ-5 and CJ-6 models from 1949 to 1958.
CJ7 models are not in this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The bracket comes with a nylon lock nut for its fastener, so use that nut rather than a substitute. Shock brackets on older Jeeps carry constant load, so look for cracks after installation.
What’s included
The bracket and a nylon lock nut. Not included: other hardware, such as bolts, if your installation calls for it.







