Overview
The Artec Industries BR1053 is a universal shock tower for mounting shocks, coilovers, air shocks or struts. Artec sells it individually, and the tower requires welding and painting during installation.
This is a shock tower meant for mounting shock absorbers in a fabricated or custom suspension setup. Mounting location and vehicle location are both universal, so placement depends on the build.
Key features
- Works with shocks, coilovers, air shocks and struts
- Universal mounting location and vehicle location
- Requires welding and painting
- Sold individually
Planning a custom tower
A shock tower carries the upper end of the shock, so its position controls how the shock moves through its travel. Before welding, set the axle or frame in its normal position, mark the shock’s upper mount and check the angle the shock will take at ride height and at full extension. A tower placed too far out or too low can bind the shock or interfere with the tire.
Because the tower is welded and painted, make sure paint is fully cured and that heat from welding does not reach nearby bushings or seals. Protect any rubber parts before striking an arc. Check the finished tower for cracks and recheck the welds after the first trail outings.
- Set the axle or frame at normal ride height first
- Mark the shock path at full extension and compression
- Protect bushings and seals from weld heat
Specifications
| Brand | Artec Industries |
|---|---|
| Part number | BR1053 |
| UPC | 816791020581 |
| Product type | Universal shock tower |
| Compatible with | Shocks, coilovers, air shocks and struts |
| Sold as | Individually |
| Installation requirement | Welding and painting |
Vehicle fitment
It is a universal tower that is not built for a single vehicle. Plan the mounting points around your own axle and chassis, since placement is set by the build.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Welding and painting are required, so the tower suits a fabricated or custom installation. Because welding is required, have a qualified welder or fabricator do the work and wear proper protective gear.
What’s included
One shock tower, sold individually.
Not included: Shocks, mounting hardware, welding supplies and paint are not part of the tower.











