Overview
The Firestone Ride-Rite Rear Air Helper Spring Kit (part 2384) is a bolt-on axle mount helper kit for the rear of a vehicle. It is rated for 4,800 lbs per pair and built with double convoluted air springs that inflate manually.
Firestone says installation is bolt on with no drilling required, so the kit can be fitted without drilling. Its stated purpose is to keep a vehicle level, level off-center loads and reduce bottoming out. Lift kit compatibility is noted as yes, though spacers may be required. No specific vehicles are named for this part number.
Key features
- Bolt-on installation, no drilling required
- Axle mount design
- Load capacity of 4,800 lbs per pair
- Double convoluted air springs
- Manual inflation with an optional height sensor
- Helps keep the vehicle level and reduces suspension fatigue
Bolt-on rear helper considerations
Bolt-on axle mounts make a helper kit easier to fit when drilling is not practical. Even so, the mounts carry load, so the bolts and attachment points should be checked after installation and then at regular service intervals. The rear should be supported throughout the fitting process to keep the bags and brackets square.
Rear helper springs work with the existing suspension, so shocks, bushings and tire condition still affect ride quality. When towing or hauling, keep the tires inflated to the correct pressure and check the rear for sag. Compressor and gauge choices are personal, so plan the inflation setup before the kit arrives.
- Re-check bolt torque after early drives
- Inspect the bags for rubbing at the mounts
- Keep a gauge in the vehicle for quick checks
Specifications
| Brand | Firestone Ride-Rite |
|---|---|
| Part number | 2384 |
| UPC | 767555111734 |
| Application | Rear |
| System type | Axle mount |
| Load capacity | 4,800 lbs per pair |
| Bag/spring type | Double convoluted |
| Installation type | Bolt on, no drilling required |
| Inflation method | Manual inflation |
| Height sensor | Optional |
| Lift kit compatible | Yes, may require spacers |
Vehicle fitment
The kit fits as a direct fit rear air bag application. Match your vehicle’s year, model and trim to it before buying.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The mounting is bolt on, so no drill is needed. Support the rear of the vehicle securely while the axle mounts are attached.
What’s included
A compressor and gauges are optional extras you can add if needed.








