Overview
The Firestone Ride-Rite Rear Air Helper Spring Kit (part 2299) is a bolt-on axle mount helper kit for the rear of a vehicle. It is rated at 5,000 lbs per pair and uses double convoluted air springs with manual inflation.
Installation is bolt on with no drilling required. The kit keeps a vehicle level, levels off-center loads, reduces suspension fatigue and reduces bottoming out. It is compatible with lift kits, though spacers may be required.
Key features
- Bolt-on installation, no drilling required
- Load capacity of 5,000 lbs per pair
- Double convoluted air springs
- Manual inflation with an optional height sensor
- Keeps the vehicle level under varying loads
- Reduces suspension fatigue and bottoming out
Keeping air springs in service
Rear air helper springs carry load alongside the leaf or coil springs, so they see constant cycling. Over time the rubber-based bag material and its end fittings can crack, rub or lose seal. Regular checks catch these problems before a bag fails on the road, and they make it easier to tell whether a leak is at a fitting or in the bag itself.
Manual inflation means pressure is set by hand, so the gauge and valve should be checked whenever the vehicle is loaded or unloaded. Spacers and lift components can change the angle of the bags, so inspect the mounting points after any suspension change. Keeping the axle mount tight and the bags clear of brake lines and tires helps the kit last.
- Look for cracks or abrasion on the bag surface
- Check the valve and fittings for air loss
- Retighten mounting bolts after the first drives
Specifications
| Brand | Firestone Ride-Rite |
|---|---|
| Part number | 2299 |
| UPC | 767555104965 |
| Application | Rear |
| System type | Axle mount |
| Load capacity | 5,000 lbs per pair |
| Bag/spring type | Double convoluted |
| Installation type | Bolt on, no drilling required |
| Inflation method | Manual inflation |
| Height sensor | Optional |
| Lift kit compatible | Yes, may require spacers |
Vehicle fitment
It is a direct fit rear air bag application. Verify that your vehicle’s year, model and trim match the kit before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The mounting is bolt-on, so drilling should not be needed. Spacers may be required with a lift kit, so check clearance at the axle after installation.
What’s included
Compressor and gauges are separate options and are not part of the kit.









