Overview
The Firestone Ride-Rite Air Helper Spring Kit, part 2565, is a rear air helper spring kit that mounts between the frame and the suspension of light trucks, vans and motorhomes. The heavy-duty convoluted air springs are described with load carrying capacities between 3,200 and 5,000 lbs per set.
Drilling is required for this kit, even though many Ride-Rite kits are bolt-on with no drilling. Check the mounting details for your application before choosing it.
Key features
- Rear mount between frame and suspension
- Heavy-duty convoluted air springs
- Load carrying capacity of 3,200-5,000 lbs per set
- Drilling required
- Brackets, air springs, hardware, air line and inflation valves included
- OEM number W217602565
Planning a rear drilled mount
Drilled mounts are a permanent change to the frame area, so take time to plan the layout. Check the frame for existing wiring, fuel lines and brake lines before marking any holes, and make sure there is clearance for the bag through full travel. Clean the drilled area and treat bare metal to limit surface rust.
Heavy-duty convoluted bags are built to carry a higher load, but they still need regular inspection. Look for chafing where the bag contacts brackets, check the air line for kinks, and recheck bolts after the first few trips. Keep the brackets square so the load is shared evenly.
- Check frame for lines and wiring before drilling
- Treat bare metal around drilled holes
- Inspect bag contact points with brackets
- Recheck hardware after the first trips
Specifications
| Brand | Firestone Ride-Rite |
|---|---|
| Part number | 2565 |
| OEM number | W217602565 |
| UPC | 767555151112 |
| Position | Rear |
| Installation type | Drilling required |
| Load carrying capacity | 3,200-5,000 lbs per set |
| Intended use | Light trucks, vans and motorhomes |
Vehicle fitment
Light trucks, vans and motorhomes cover many applications, so compare your truck or van against the application details before buying.
Check that your vehicle’s year, model and trim fit the rear mount before ordering.
Installation notes
Mark and drill the mounting holes before fitting the brackets, and plan their placement for your application first.
What’s included
Brackets, air helper springs, hardware, air line and inflation valves come with the kit.
Not included: The air compressor is not included with the kit.









