Overview
The Firestone Ride-Rite rear air helper spring kit 2071 is a leaf spring mount system with double convoluted air springs rated at 4,800 lbs per pair. It is designed to level off-center loads, reduce suspension fatigue and reduce bottoming out at the rear of a vehicle.
The kit provides up to 5000 lbs of leveling capacity, and the pair rating is 4,800 lbs. It is used without an in-bed hitch and is lift kit compatible, though spacers may be needed. It is sold as Direct Fit, so confirm fit for your vehicle before ordering.
Key features
- Leaf spring mount system
- Double convoluted air springs
- 4,800 lbs per pair
- Manual inflation
- Optional height sensor
- Lift kit compatible, may require spacers
Leaf spring mount basics
A leaf spring mount system places the air springs where the leaf springs can carry load through the bracket. Leaf springs flex, so the mounting hardware and bushings take repeated movement. Check those points after installation and during routine service, since loose hardware can change how the rear sits and can wear the spring bracket over time.
Manual inflation means the driver sets pressure by hand, so keep a gauge with the setup and check pressure before towing or hauling. A height sensor is optional and can help hold ride height when used with a compatible control. Lift kits may require spacers, and spacer use should be checked against the rear geometry.
- Check bushings for wear
- Tighten mount hardware after first drives
- Keep a gauge in the vehicle
- Recheck spacer clearance after lift work
Specifications
| Brand | Firestone Ride-Rite |
|---|---|
| Part number | 2071 |
| UPC | 767555014684 |
| Application | Rear |
| System type | Leaf spring mount |
| Air spring type | Double convoluted |
| Load capacity | 4,800 lbs per pair |
| Installation | Requires drilling |
| Inflation method | Manual |
| Compressor and gauges | Optional, not included |
| Height sensor | Optional |
| Lift kit compatibility | Yes, may require spacers |
| Application note | Without in-bed hitch |
Vehicle fitment
Confirm fit for your vehicle’s year, model and trim before ordering, since the match depends on the specific vehicle.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Installation requires drilling, so plan for mounting holes before starting. Inflation is manual, and the compressor and gauges are optional accessories and not included. A lift kit may require spacers.
What’s included
Check the kit contents against your installation before starting.
Not included: Compressor and gauges (optional).









