Overview
The Firestone Ride-Rite Air Helper Spring, part number 6764, is a double convoluted air bag spring with a 6.4 inch diameter. It keeps the vehicle level, levels off-center loads and reduces bottoming out.
It also reduces suspension fatigue, improves the ride and increases vehicle stability. It is a universal fit spring, so verify its installed height and mounting dimensions against your vehicle before ordering.
Key features
- Keeps the vehicle level and levels off-center loads
- Reduces suspension fatigue and bottoming out
- Air adjustments improve the ride
- Increases vehicle stability.
How air helper springs work
An air helper spring sits alongside the main suspension and adds support when the load increases. As air pressure rises, the bag stiffens and lifts the rear of the vehicle, which helps keep it closer to level with heavy or off-center cargo. Because the bag is pressure driven, its effect depends on how much air is in it and on how the rest of the suspension is working.
Helper springs wear from heat, road salt and repeated flexing, so the rubber and fittings deserve a look during tire rotations or brake service. Pay attention to a spring that loses pressure overnight or shows cracking at the folds, since a failing bag can let the vehicle sag and load the shocks unevenly. Replacing a worn bag goes more smoothly when the mounts and air line are also checked.
- Check for cracks along the bag folds
- Look for air loss after parking overnight
- Inspect the mounts and studs for wear
- Replace the air line if it is hardened or cracked
Specifications
| Brand | Firestone Ride-Rite |
|---|---|
| Part number | 6764 |
| UPC | 767555111628 |
| Air bag type | Double convoluted |
| Air bag diameter | 6.4 inches |
| Installed height | 4.5 to 5.5 inches |
| Max extended height | 7 inches |
| Max compressed height | 7 inches |
| Air inlet size | 1/4 NPT |
| Mounting type | (2) 3/8-16 studs top, (2) 3/8-16 studs bottom |
Vehicle fitment
This spring is universal fit rather than built for one vehicle, so match the installed height and stud pattern to your vehicle before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The spring uses two 3/8-16 studs at the top and two at the bottom. Compare that stud pattern and the 4.5 to 5.5 inch installed height with your mounting points before fitting.
What’s included
Confirm the spring and hardware in your package before starting the install.












