Overview
The Firestone RED Label Ride Rite Extreme Duty air spring kit 2701 is a rear air spring kit that includes brackets, air helper springs, hardware, air line and inflation valves. The design aims to maximize safe load carrying capacity, stability and ride quality. No drilling is needed to install it.
No make, model or year is named for the 2701. Confirm your vehicle’s year, model and trim before ordering.
Key features
- Rear mount air spring kit
- Brackets, hardware, air line and inflation valves included
- No drilling required
- Designed and assembled in the USA.
- Built on an air spring design used in heavy duty applications.
- Aims to improve stability and ride quality under load
Load planning and mounting clearance
A rear air spring kit works best when the load plan is clear before installation. Weigh the typical cargo, trailer tongue or passenger load, and set the air to match that weight rather than to a guess. Overinflating a bag can make the ride harsh and reduce the travel the springs need.
Plan the air line and valve routing before mounting the springs. Keep the line away from the exhaust, sharp edges and moving parts, and leave slack so the bag can move freely. Valves should be reachable but shielded from road debris and mud.
Inspect the springs and brackets after the first few weeks of use. Look for chafing, loose hardware, and any sign that the bag is rubbing the frame or axle, since these show up early and are easy to correct.
- Weigh typical loads before setting air pressure
- Route air lines away from exhaust and moving parts
- Keep valves shielded from road debris
Specifications
| Brand | Firestone Ride-Rite |
|---|---|
| Part number | 2701 |
| UPC | 767555159668 |
| Product line | RED Label (Ride Rite Extreme Duty) |
| Position | Rear |
| Installation | No drilling required |
| Included | Brackets, air helper springs, hardware, air line, inflation valves |
| Assembly | Designed and assembled in the USA |
| Load capacity | Load capacity is not confirmed for this kit. Check the rating against your load before choosing it. |
Vehicle fitment
No make, model or year is named, so confirm your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
No drilling is needed, and the brackets are part of the kit. Plan clearance for the air lines and valves before you start mounting the springs.
What’s included
Brackets, air helper springs, hardware, an air line and inflation valves.
Not included: Check whether a compressor and gauges are needed for your setup, since neither comes with the kit.









