Overview
The Firestone Ride-Rite rear air helper spring kit 2190 is an axle-mount load leveling kit with double convoluted air springs for towing and hauling. It keeps the vehicle level, levels off-center loads, and reduces suspension fatigue and bottoming out.
It is a direct fit rear air bag application. Confirm fit for your vehicle’s year, model and trim before ordering, and plan for drilling during installation.
Key features
- Keeps the vehicle level and levels off-center loads
- Reduces suspension fatigue and bottoming out
- Helps increase vehicle stability.
- Manual air adjustments to improve the ride
- Lift kit compatible, though spacers may be required
Towing and load leveling basics
Load leveling air helpers support the rear of the vehicle when a trailer or heavy cargo pushes the suspension down. They do not add capacity to the frame, axle or tires, so the rated loads of those parts still set the limit. Keep the load within the vehicle’s ratings and use the air helpers to level the stance, not to carry more weight.
Installation involves drilling, so mark the mounting points carefully and support the vehicle before working near the axle. When a lift kit is fitted, spacers may be needed to keep the bags clear of the axle and brackets. Inspect bags for chafing once a season, check the fittings for leaks, and adjust air pressure gradually while measuring ride height on both sides.
- Check tire pressure before adjusting the bags
- Inspect the bags for rubbing
- Keep the compressor hose away from heat
Specifications
| Brand | Firestone Ride-Rite |
|---|---|
| Model | 2190 |
| UPC | 767555096918 |
| System type | Axle mount |
| Load capacity | 4,800 lbs per pair |
| Bag/spring type | Double convoluted |
| Installation type | Requires drilling |
| Inflation method | Manual inflation |
| Height sensor | Optional |
| Lift kit compatible | Yes, may require spacers |
Vehicle fitment
Confirm fit for your vehicle’s year, model and trim before ordering, and check the axle type and suspension setup first.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The axle-mount design requires drilling, so confirm the mounting points and tools before starting. Drilling near the axle should be done with the vehicle safely supported. Air is added manually, and a compressor and gauges are sold separately. If a lift kit is installed, spacers may be required.
What’s included
Confirm the included parts against your installation before starting.
Not included: Compressor and gauges, which are sold separately. The height sensor is optional.









