Overview
The Firestik KW5B is a black 5′ CB whip antenna built on a 5/8 wave design and rated at 500 watts. It belongs to the KW Series, which Firestik describes as its original wire-wound CB design, proven since 1975. Its solid-fiberglass core and 3/8″-24 threaded base are meant for autos, trucks, vans, motorcycles and ATVs.
The KW5B is universal fit and is not sized for one vehicle. Where a metallic ground plane exists, it can be used in a single-antenna arrangement, while a dual co-phased arrangement works on vehicles of any material. Each antenna is sealed in a water-tight sleeve with UV and pigment stabilizers, and its top-loaded shape allows it to receive NOAA emergency weather alerts on capable radios. Every KW antenna is factory bench tested for resonant frequency.
Key features
- Black 5′ whip on 5/8 wave construction
- Solid-fiberglass core with a glass fiber reinforced shaft
- Heavy insulated copper wire wound to prevent oxidation
- Loading coil reachable for fine SWR adjustment
- Tapered base contact suited to Firestik mounts and accessories
- Water-tight, static reducing sleeve with UV and pigment stabilizers
- Receives NOAA weather alert broadcasts on compatible radios
- Factory bench tested for resonant frequency
Choosing a mount and tuning plan
Mounting location decides most of how a CB whip performs. A metal roof or fender with a solid ground plane gives the cleanest pattern, while fiberglass or composite bodies need a dual co-phased arrangement. Choose a spot clear of doors, hinges and roof racks, and leave room to reach the loading coil for adjustments.
Plan the tuning session before the first real trip. Set the antenna upright, connect the coax and the radio, then read SWR across the channels and trim the loading coil in small steps. Repeat the check after moving the antenna or the mount, since any change in position shifts the reading.
Inspect the whip and base after rough trails. Look for loose threads, cracked fiberglass and corrosion on the coax connector, and retighten the base if it moves. A torn sleeve lets moisture into the coil, so replace the whip when the sleeve is damaged.
Specifications
| Brand | Firestik |
|---|---|
| Product line | KW Series CB Antenna |
| Model | KW5B |
| UPC | 716414100099 |
| Whip length | 5′ |
| Color | Black |
| Power rating | 500 watts |
| Wave | 5/8 wave |
| Core | Rugged solid-fiberglass |
| Base thread | 3/8″-24 |
| Warranty | 5 Year Limited Warranty |
Vehicle fitment
The KW5B is universal fit, so no specific vehicles are named and it is not sized for one vehicle. Fit depends on your mounting method and on whether a metallic ground plane is available for a single-antenna setup.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
SWR tuning has to happen after the antenna is installed on the vehicle, and it is needed for every mounting location. For peak performance, use the 18-foot Fire-Flex coax, part DASTS-8X18. Transmitting antennas are not plug-and-play, so plan time for tuning before regular use.
What’s included
Only the antenna is described. No mount or coaxial cable is named as included.
Not included: mount and coaxial cable.









