Overview
The Firestik KW Series CB Antenna is a 3′ black 5/8 wave whip for CB radios, rated at 300 watts, with a rugged solid-fiberglass core and a 3/8″-24 threaded base. It is the original wire-wound CB design from Firestik, in use since 1975. It is universal fit for autos, trucks, vans, motorcycles and ATVs.
Each KW is wound with heavy insulated copper wire to resist oxidation and shorted windings. The top-loaded design receives NOAA emergency weather alerts and national weather broadcasts on compatible radios. Like every CB antenna, it must be tuned for SWR once it is installed on the vehicle.
Key features
- Original wire-wound design, which Firestik states is 100% American made with 100% American materials
- Glass fiber reinforced shaft for flexibility and ruggedness
- Heavy insulated copper winding that resists oxidation and shorted windings
- Accessible loading coil for precise SWR adjustments
- Tapered contact point on the 3/8″-24 base that works with Firestik mounts and accessories
- Static reducing, water-tight sleeve with UV and pigment stabilizers
- Receives NOAA emergency weather alerts and national weather broadcasts on compatible radios
- Factory bench tested for resonant frequency and overall quality
Tuning a CB antenna after install
Tuning is the step most installs skip, and it matters more than the whip itself. SWR shows how well the antenna matches the radio, and a poor match pushes energy back into the radio instead of the air. Adjust the loading coil with a meter connected, and read SWR on the channel you use most.
Anything near the antenna can change the reading. Metal racks, nearby mounts and cable runs all shift the tuning, so retune after adding accessories or moving the cable. Use good coax and solid connections, because a loose connector can produce a misleading reading even when the antenna is fine.
- Tune with the antenna fully mounted
- Recheck SWR after adding gear to the vehicle
- Keep the coax away from hot exhaust parts
Specifications
| Brand | Firestik |
|---|---|
| Product line | KW Series CB Antenna |
| UPC | 716414100037 |
| Whip length | 3′ |
| Color | Black |
| Power rating | 300 watts |
| Wave | 5/8 wave |
| Core | Rugged solid-fiberglass |
| Base thread | 3/8″-24 |
| Winding | Heavy insulated copper wire |
| Warranty | 5 Year Limited Warranty |
Vehicle fitment
This is a universal fit antenna. Firestik does not tie the KW Series to a particular vehicle, so no years or models are named. It installs in a single configuration on autos, trucks, vans, motorcycles and ATVs when a metallic ground plane is available, or in a dual co-phased configuration on any vehicle made from any material.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The KW must be tuned for SWR after it is mounted on the vehicle, because the final mounting location changes the reading. The loading coil is easy to reach for adjustments. The tapered base contact is designed to reduce vibration-induced loosening in the mount. The manufacturer pairs these antennas with its 18-foot Fire-Flex coax, part DASTS-8X18. Have a qualified installer check the tuning if you are unsure how to adjust it.
What’s included
Only the antenna is included.
Not included: A mount and coaxial cable are not included. The 18-foot Fire-Flex coax, part DASTS-8X18, is a cable option for this antenna.









