Overview
The Firestik K-64A is a 3-way mobile CB antenna mount for single or dual antenna installations on a car, truck, van, motorcycle or motorhome. Its angle bracket clamps to horizontal or vertical mirror arms and rails, or the clamp can be left off so the bracket mounts as a side bracket on a flat vertical surface.
The K-64A model includes the K-4A stud mount with a screw-on coaxial termination, a well-known stud mount from Firestik. All models come with mounting hardware. Check the rail, tube and surface against your vehicle before choosing it, since fit depends on those dimensions.
Key features
- Clamp can be positioned horizontally or vertically for mirror arms and rails
- Clamp can be omitted to use the bracket on any flat vertical surface
- Cold rolled steel brackets with a chrome plated finish
- K-4A stud mount with screw-on coaxial termination included on the K-64A model
- Works for single or dual antenna installation
- Complete mounting hardware with all models
Before you mount a CB bracket
A mount is only as steady as its clamp and the surface it grips. Check that the bracket sits square on the rail or flat surface and that nothing rubs against it when the vehicle turns or the door moves. Vibration works loose bolts over time, so a quick check after the first few drives is worthwhile.
Bracket placement also affects the antenna. Keep the stud clear of roof racks, doors and trim, and allow room to reach the coaxial connection. Route the cable so it does not pinch against the body, and secure it with clips to reduce chafing and rattles. A tidy mount is easier to adjust later.
- Test the clamp before tightening fully
- Leave access to the coax connector
- Tighten hardware again after rough trail use
Specifications
| Brand | Firestik |
|---|---|
| Part number | K-64A |
| UPC | 716414200171 |
| Type | 3-way mobile CB antenna mount |
| Material | Cold rolled steel |
| Finish | Chrome plated |
| Stud | K-4A screw-on coaxial termination |
| Bracket size | 2.25 in (57 mm) wide by 2.9 in (74 mm) high |
| Height with stud | 4.2 in (107 mm) |
| Protrusion from surface | 1.9 in (48 mm) |
| Tube diameter with standard bolts | Up to 0.850 in (22 mm) |
| Tube diameter with longer bolts | Up to 1.5 in (38 mm) |
Vehicle fitment
Confirm fit by measuring your mirror arm, rail or flat surface and comparing the tube diameter with the sizes in the table above.
No vehicle is named for this mount. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
With the standard bolts, the bracket fits a tube up to 0.850 in (22 mm) in diameter. Longer bolts raise the maximum to 1.5 in (38 mm). Measure the rail or tube before choosing bolts, because the two bolt sets cover different diameters.
What’s included
All models come complete with mounting hardware, and the K-64A model includes the K-4A stud mount.
Not included: the CB antenna and coaxial cable.














