Overview
The Fabtech FTS20507 is a heavy duty replacement tie rod end, part number FABFTS20507, for steering linkage. It is built as a heavy duty upgrade intended to improve steering strength and the service life of the vehicle it is installed on.
Fabtech states universal fit, so the tie rod end is not matched to a specific make, model or year. Compare its stud and thread dimensions with your current part before fitting it.
Key features
- Heavy duty construction as an upgrade over a standard replacement
- Designed to improve steering strength
- Designed to extend service life
- Universal fit design
Choosing a replacement tie rod end
A tie rod end connects the steering arm to the steering knuckle or center link, and it carries steering load on every turn. Because it sits in the path of load and movement, the stud fit, taper and thread have to match the joint it replaces before the end is pressed in and tightened.
Heavy duty ends are often chosen where steering takes more load, such as larger tires or off-road use. Pairing a heavy duty end with a worn drag link or pitman arm can leave play in the system, so check the rest of the linkage at the same time. Look for torn boots, looseness at the stud and any clicking when the wheel is turned.
- Check stud taper and thread against the old end
- Inspect the drag link and center link for play
- Replace damaged boots and clamps at the same time
- Use new jam nuts and torque to specification
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FABFTS20507 |
| Product type | Replacement tie rod end, heavy duty |
| Fitment | Universal fit |
Vehicle fitment
This tie rod end is universal fit, not a vehicle-specific part. Match it to your steering geometry before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Tie rod work changes toe and steering alignment, so have the alignment checked once the new end is installed.
What’s included
Check the package contents against your installation before starting.
Not included: the rest of the steering linkage and any hardware needed to complete the installation.









