Overview
The ARB CS014F is a leaf spring from ARB 4×4 Accessories, part number CS014F, with a two-stage leaf pack. The primary leaves handle the unladen load, and the secondary leaves join when the vehicle carries more weight. Confirm fit for your vehicle’s year, model and trim before ordering.
ARB uses draw tapered, diamond cut leaves on this spring, along with graphite coating between the leaves and shot peening on the tension side. Each spring is fully scragged and load tested, and regreasable nylon interleaf liners are fitted at the leaf tips to reduce friction where the load is greatest.
A spring of this kind is judged on how it behaves across its whole range, not just at full load. Scragging sets the leaves early so the ride does not drift, and the lubricated liners keep the leaves from binding as they flex. Both points matter most for a vehicle that runs unladen most of the time.
Scragging is done so the spring takes a set early, which keeps it from drifting lower over the first miles of use. Because the CS014F is a two-stage design, the set matters on both stages, and the load testing confirms that the spring behaves as specified before it leaves the manufacturer.
Compare the spring’s capacity with your truck’s real load before choosing it, and confirm the rating for your vehicle before ordering.
Key features
- Two-stage pack gives extra support under load.
- Draw tapered leaves spread load along the spring.
- Diamond cut leaf ends reduce end stress.
- Scragging sets the spring to resist sagging.
- Load testing against the specification.
- Regreasable nylon interleaf liners.
- Shot peened tension side of each leaf.
Scragging and long-term sag
Scragging is a factory step that loads the leaves beyond their normal working range so they take a set before they reach the truck. The result is a spring that holds its height more consistently over the first months of use. Even so, every leaf spring settles a little over time, so ride height is worth checking at service intervals rather than assumed. Recording those checks helps spot a trend early.
Two-stage packs add complexity, since both stages must keep their set for the spring to ride evenly. If one side sits lower than the other, or the ride changes suddenly after a heavy load, inspect the leaves and both stages before blaming the shocks. Lubricated liners help the leaves slide, which keeps the stages working together rather than binding.
- Measure ride height on both sides at service
- Look for cracks near the eye and leaf tips
- Re-grease nylon liners on schedule
- Check shackles and bushings for wear
Specifications
| Brand | ARB 4×4 Accessories |
|---|---|
| Part number | CS014F |
| UPC | 700003476541 |
| Type | Leaf spring |
| Leaf pack | Two-stage |
| Leaf ends | Draw tapered, diamond cut |
Vehicle fitment
Confirm fit for your vehicle’s year, model and trim before ordering.
What’s included
One leaf spring. Check the package contents against your installation before starting.



