Overview
The Skyjacker FA300 is a 6 inch drop pitman arm for the 1966–1979 Ford Bronco, the 1975–1977 Bronco Sport, the 1976 F-100 and the 1977–1979 F-150 with power steering.
The FA300 is an Extreme Drop arm with a 6 inch drop in the front position, built to address bump steer, and it carries a limited lifetime warranty.
The classic Bronco is the main use, and the list also reaches into two older F-series truck lines.
The trims named include Custom, Northland, Ranger, Ranger XLT, Roadster and Wagon for the Bronco, and Base through Ranger Lariat and XLT for the F-series entries. Early Bronco owners should check the 1966–1979 span against their build year.
The FA300 is a power steering arm in the front position, with the 6 inch drop that the specification line lists. Because the list covers vehicles built over fourteen years, owners should compare build year, model name and trim before choosing it.
Key features
- 6 inch amount of drop
- Front position
- For power steering
- Direct fit
- Comes with a limited lifetime warranty.
- Designed to remove bump steer concerns.
- Covers the 1966–1979 Ford Bronco
Care for classic steering
Older Bronco steering systems use parts that have been in service for decades, so a new arm should be installed alongside a check of the surrounding linkage. Early models often show wear at the steering box, the drag link ends and the pitman arm nut, and that wear can make a new arm feel loose if it is not addressed.
If the vehicle has been driven on rough ground, look for bent linkage, cracked mounting areas and loose steering box bolts. Keep the steering centered before removing the old arm, and when fitting the new one, tighten the nut securely and recheck it after a short drive. Routine lubrication and inspection keep the steering responsive.
- Check the steering box for play
- Inspect the drag link and tie rod ends
- Tighten the pitman nut and recheck after a short drive
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | FA300 |
| UPC | 803696130453 |
| Product type | Extreme Drop Pitman Arm |
| Amount of drop | 6 inches |
| Position | Front |
| Fit type | Direct fit |
| Steering type | Power steering |
| Warranty | Limited lifetime warranty |
Vehicle fitment
The FA300 fits early Ford Broncos and two F-series pickups, with trims shown below.
- 1966–1979 Ford Bronco (Base, Custom, Northland, Ranger, Ranger XLT, Roadster, Wagon)
- 1975–1977 Ford Bronco Sport
- 1976 Ford F-100 (Base, Custom, Northland, Ranger, Ranger XLT)
- 1977–1979 Ford F-150 (Base, Custom, Northland, Ranger, Ranger Lariat, Ranger XLT, XLT)
The 1980 and newer Bronco is not covered by the FA300. Ensure your Bronco’s build year and trim are covered before ordering.
Installation notes
It suits front power steering as a direct fit. Steering checks by a qualified technician belong at the end of the job.
What’s included
One pitman arm. Make sure all pieces are present before work begins.








