Overview
The Fabtech FTS310 is a 4 inch dropped pitman arm for the 2000–2003 Ford F-150, the 2004 F-150 Heritage and the 1999–2004 F-250 and F-350 Super Duty with power steering.
Dropped pitman arms are needed in many kits to correct steering geometry once a suspension system is installed. The arms are forged and CNC machined, which is designed to make them stronger than stock units. For a lifted Ford truck, the FTS310 replaces the front pitman arm with one that has a 4 inch drop, giving the drag link a flatter working angle than the factory arm.
Drop pitman arms matter because lifting a truck raises the steering box relative to the axle, which changes the angle of the drag link and can cause bump steer and vague handling. Fabtech positions the FTS310 as the corrective part for that problem on its F-150 and Super Duty applications, and it should be treated as a steering component rather than a cosmetic upgrade.
Key features
- 4 inch amount of drop
- Front position
- For power steering
- Direct fit
- Forged and CNC machined
- Designed for greater strength than a stock unit
- Corrects steering geometry after a suspension installation
Steering geometry after a lift
When a truck is lifted, the steering box and the axle move apart in relation to each other, and the drag link angle changes. A steeper link can cause bump steer, vague centering and extra wear on the joints. A dropped pitman arm changes the geometry at the box so the drag link runs closer to level, which is why it is often installed with a lift.
Because the pitman arm is part of the steering system, the rest of the linkage deserves attention too. Tie rod ends, the drag link and the steering box all affect how the new arm performs. Worn joints can make a new arm feel loose, so inspect them before and after the swap.
- Check the drag link ends and tie rods for play
- Inspect the steering box for leaks
- Re-check the pitman arm nut after the first drives
- Have the alignment checked after the swap
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FTS310 |
| UPC | 674866003675 |
| Product type | Pitman arm |
| Amount of drop | 4 inches |
| Position | Front |
| Fit type | Direct fit |
| Steering type | Power steering |
Vehicle fitment
The FTS310 is made for half-ton and Super Duty Ford trucks across a narrow range of years, with the trims shown below.
- 2000–2003 Ford F-150 (Base, King Ranch, Lariat, XL, XLT)
- 2004 Ford F-150 Heritage (XL, XLT)
- 1999–2004 Ford F-250 Super Duty (Harley-Davidson Edition, King Ranch, Lariat, XL, XLT)
- 1999–2004 Ford F-350 Super Duty (Harley-Davidson Edition, King Ranch, Lariat, XL, XLT)
Only the 2000–2003 F-150, 2004 F-150 Heritage and 1999–2004 Super Duty F-250 and F-350 are named; other F-150 years are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The FTS310 is a direct fit, so it replaces the factory arm. Follow the included instructions for torque values and steps. Steering parts are safety-critical, so have a qualified technician check the steering after a lifted truck is back on the ground.
What’s included
One Fabtech pitman arm. Check the package for a nut or washer before installing.








