Overview
The Skyjacker DA20 is a 6 inch drop pitman arm for 1978–1993 Dodge W-series four-wheel-drive trucks, including the W100, W150, W200, W250, W300 and W350, with power steering.
It is designed to reduce bump steer and carries a limited lifetime warranty. The arm has a 6 inch drop in the front position, which corrects steering angles on a lifted truck.
These Dodge W-series trucks were the four-wheel-drive versions of the D-series. The W100 appears only in 1986–1989, and the W150 runs from 1978 to 1993.
The trims named are Custom for the W100, Base and S for the W150, and Base for the W200, W250, W300 and W350, so buyers can confirm their truck quickly from the list below.
The drop itself does the work: a 6 inch drop in the front position lowers the end of the arm that connects to the drag link, which is why lifted trucks use it. Confirm the steering box type before ordering, since this arm is made for power steering only.
Key features
- 6 inch amount of drop
- Front position
- For power steering
- Direct fit
- It carries a limited lifetime warranty.
- It is designed to reduce bump steer.
- Covers six W-series models
Steering geometry on lifted trucks
A pitman arm connects the steering box to the drag link and converts steering input into side-to-side movement. On a lifted truck the drop changes the geometry of that connection, so the arm is often replaced with a lift to bring steering angles closer to their factory design. Its effect is most noticeable at the drag link end, where a change in angle can affect how the front wheels respond.
When choosing a drop arm, match the steering box type and confirm the vehicle’s year and trim. Drag links, tie rod ends and the steering stabilizer are often inspected at the same time, because worn parts can make a new arm feel loose. After installation, recheck every fastener and look for play at the drag link end during the first few drives.
- Check steering box type before ordering
- Inspect tie rod ends and drag link joints
- Look for play or clunking at the arm
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | DA20 |
| UPC | 803696127187 |
| Product type | Pitman arm |
| Amount of drop | 6 inches |
| Position | Front |
| Fit type | Direct fit |
| Steering type | Power steering |
| Warranty | Limited lifetime warranty |
Vehicle fitment
The arm fits six Dodge W-series models across different year ranges, with trims noted below.
- 1986–1989 Dodge W100 (Custom)
- 1978–1993 Dodge W150 (Base, S)
- 1978–1980 Dodge W200 (Base)
- 1981–1993 Dodge W250 (Base)
- 1978–1980 Dodge W300 (Base)
- 1981–1993 Dodge W350 (Base)
The Ram pickups are not covered, and the W-series entries end in 1993. Make sure your truck’s year, model and trim match before ordering.
Installation notes
The arm is a direct fit for front power steering. Use correct torque values for the steering components, and have a qualified technician check the lifted truck’s steering after installation.
What’s included
One pitman arm. Check the package contents against your installation before starting.








