Overview
The Fabtech FTS7341 is a front performance twin tube shock absorber designed for a w/4 in. lift. It has a 2.38 inch diameter twin tube hydraulic body and is set up as gas charged.
It fits 2011–2012 Chevrolet Silverado 2500 HD and 3500 HD and GMC Sierra 2500 HD and 3500 HD trucks, in the trims named in the fitment section. It has 12.4 in. of travel, a 9/16 inch chrome hardened piston rod and a 1 3/8 inch OD piston, with high flow 9 stage valving and a closed cell foam insert.
Key features
- Front position performance shock
- Designed for a w/4 in. lift
- Lower mount EB1 and upper mount ES34
- High flow 9 stage valving
- Closed cell foam insert
- 9/16 inch chrome hardened piston rod
Understanding gas charged damping
A gas charged shock has a pressurized chamber that keeps the oil from foaming when the damper heats up. That steadier action matters on rough trails and during long descents, when a standard hydraulic shock can lose firmness. The gas charge does not replace good valving, so the shock still depends on its piston and valve design.
Owners who switch between daily driving and off-road use should consider how the truck will be used most. A firmer damper can feel harsher on pavement, while a softer setup can wallow on washboard roads. Keep the front shocks matched in type, and replace them as a pair so both sides respond the same way.
- Inspect the shaft for scoring or an oil film
- Note any change in ride height after a few weeks
- Keep the mounts clean so the bushings can move freely
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FTS7341 |
| UPC | 674866033832 |
| Position | Front |
| Fitment type | Direct fit |
| Lift height | w/4 in. lift |
| Collapsed length | 29.98 in. |
| Extended length | 17.58 in. |
| Travel length | 12.4 in. |
| Lower mount | EB1 |
| Upper mount | ES34 |
| Reservoir | No |
| Shock body | 2.38 inch diameter twin tube hydraulic |
| Piston rod | 9/16 inch chrome hardened |
| Piston | 1 3/8 inch OD |
| Valving | High flow 9 stage |
| Insert | Closed cell foam |
| Finish | White powdercoat with blue Fabtech logo |
| Hydraulic / gas charged | Gas Charged |
Vehicle fitment
It is a direct fit for 2011–2012 Chevrolet Silverado 2500 HD (LT, LTZ, WT) and 3500 HD (LT, LTZ, WT), and 2011–2012 GMC Sierra 2500 HD (Denali, SLE, SLT, WT) and 3500 HD (Denali, SLE, SLT, WT).
Model years after 2012 and light-duty pickups fall outside this fit. Confirm fit for your truck’s year, model and trim before buying.
Installation notes
The stated lift is w/4 in., so match your suspension height to that figure. Because the gas charged setting is listed, check the EB1 lower and ES34 upper mounts against your existing unit before fitting.
What’s included
The shock is designed for a w/4 in. lift, so match your suspension height to that figure. Because it is set up as gas charged, check the EB1 lower and ES34 upper mounts against your existing shock before fitting.







