Overview
The Fabtech FTS7346 is a front shock absorber for 2014–2016 Ram 2500 and 2013–2016 Ram 3500 4WD trucks set up with a 7 inch lift. It is a direct-fit front unit from the Performance series twin tube range.
A 7 inch lift changes travel and geometry at the front axle, so this shock is sized for that height rather than stock ride height. It suits Ram heavy-duty owners running a 7 inch lift who need a front shock for those model years.
Key features
- Performance series twin tube shock absorber design
- Front position, direct fit
- Sized for a 7 inch lift on 4WD Ram 2500 and 3500 trucks
- Fabtech part number FTS7346 with UPC 674866089457
Front end checks after lifting
A front shock works harder on a tall suspension because the steering and axle angles change with the lift. Keeping the shock matched to the lift height helps control body motion at highway speeds and on rough dirt roads, where the front wheels take the most impact and the shock does most of the damping work.
Front shocks wear alongside the steering components, so inspect ball joints, tie rod ends and control arm bushings whenever a shock is replaced. Check the old shock for seepage and a bent shaft. After a lift change, have the alignment checked, since new angles affect tire wear and steering feel.
- Inspect ball joints and tie rod ends
- Check control arm bushings for play
- Have the alignment checked after the job
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FTS7346 |
| UPC | 674866089457 |
| Position | Front |
| Fit type | Direct fit |
| Lift height | 7 inch |
| Shock type | Performance series twin tube |
Vehicle fitment
It fits the 2014–2016 Ram 2500 (Big Horn, Laramie, Laramie Limited, Laramie Longhorn, Lone Star, Outdoorsman, SLT, Tradesman) and the 2013–2016 Ram 3500 (Big Horn, Laramie, Laramie Limited, Laramie Longhorn, Limited, Lone Star, SLT, ST, Tradesman).
The Power Wagon trim does not appear in the 2500 list for this part number, and Ram generations other than these years are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The shock is sized for a 7 inch lift. A different lift height or a non-4WD truck is outside the fitment stated here, so check with Fabtech before fitting.
What’s included
Check the package contents against your installation before starting, including brackets and mounting hardware.









