Overview
The Fabtech FTS6000 is a rear Performance shock absorber for 1984–2001 Jeep Cherokee (XJ), 2004–2006 Jeep Wrangler (LJ) and 1997–2006 Jeep Wrangler (TJ). It has a 2 inch diameter monotube body, so confirm the body style before installing if that difference matters for your build.
Fabtech designed its Performance shocks to work with its suspension systems for ride control. This model uses high velocity 9-stage valving and a closed cell foam insert, which Fabtech says improves dampening and reduces shock fade at high speeds. The stated fitment height is a 2.5 in. lift.
Key features
- High velocity 9-stage valving for dampening control
- Closed cell foam insert, which Fabtech says reduces shock fade at high speeds
- 2 inch diameter monotube body with nitrogen gas charge
- 9/16 inch chrome hardened piston rod and 1 3/8 inch OD piston
- No reservoir, with a white powdercoat finish and blue Fabtech logo
Rear shock tuning on older Jeeps
Rear shocks on Cherokee and Wrangler platforms control axle movement on rough terrain and help keep the tires planted off pavement. Valving sets how quickly the shock resists compression and extension, so a shock built for trail speeds feels different from a stock unit on the highway. Matching the rear shock to the front helps the vehicle settle evenly.
Before fitting, measure the old shock’s collapsed and extended lengths and compare them with the new one. Shocks that are too long can bottom out, while shorter units can limit droop. Inspect the rear shock mounts and bushings at the same time, and replace any cracked or collapsed rubber so the new shock is not loaded unevenly.
- Look for oil streaks along the shock body
- Check the upper and lower eyelets for play
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FABFTS6000 |
| UPC | 674866015821 |
| Shock series | Performance Shock |
| Position | Rear |
| Shock body | 2 inch diameter monotube, nitrogen charged |
| Charge type | Hydraulic |
| Reservoir | No |
| Collapsed length | 22.5 in. |
| Extended length | 14.32 in. |
| Travel length | 8.18 in. |
| Lower mount | EB1 |
| Upper mount | EB1 |
| Piston rod | 9/16 inch chrome hardened |
| Piston OD | 1 3/8 inch |
| Valving | High flow 9 stage |
| Insert | Closed cell foam |
| Finish | White powdercoat with blue Fabtech logo |
| Lift height | 2.5 in. lift |
Vehicle fitment
It fits 1984–2001 Jeep Cherokee (XJ) in Base, Briarwood, Chief, Classic, Country, Laredo, Limited, Pioneer, SE and Sport trims, 2004–2006 Jeep Wrangler (LJ) in Unlimited and Unlimited Rubicon trims, and 1997–2006 Jeep Wrangler (TJ) in 65th Anniversary Edition, Rubicon, SE, Sahara, Sport and X trims.
Not covered: the Wrangler YJ, the Wrangler JK and the Wrangler JL generations. Confirm your vehicle’s year, model and trim before ordering.
What’s included
The item is the Fabtech Performance shock absorber, part number FABFTS6000.







