Overview
The Fabtech Dirt Logic 2.25 is a rear monotube gas charged shock absorber, part number FTS810012, for 2002–2007 Dodge Ram 1500 trucks in the Laramie, SLT, ST and TRX4 trims. It is a large diameter monotube shock for lifted vehicles that mounts in the factory location as well as several other shock configurations.
The Dirt Logic 2.25 is designed for dampening on lifted trucks. It comes with or without a reservoir, in a blue or black anodized finish.
Key features
- Large diameter monotube body for lifted trucks
- Gas charged design
- Mounts in the OE shock location and in several other shock configurations
- Rear position
- Available with or without reservoir
- Blue or black anodized finish
Rear shock installation checks
Rear shocks on the Ram 1500 handle bounce and rebound after the rear axle moves over bumps, so the damping and mounting angle both matter. Before installing, compare the shock’s mounting eyes with the bracket on the truck, and confirm the bushings are seated square. A monotube body keeps its working piston in one tube, which helps with heat on long grades. Using the correct washers and sleeve arrangement keeps the mount from loosening.
If the truck is set up with a reservoir, route the hose so it clears the tire, frame and exhaust. Check that rebound travel does not contact the frame at full extension. After the first drive, recheck the mounting bolts and look for any seepage around the body seals.
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FTS810012 |
| UPC | 674866094765 |
| Position | Rear |
| Fitment type | Direct fit |
| Lift height | 6 in. lift |
| Shock type | Monotube, gas charged |
| Material | Stainless steel |
| Reservoir | Available with or without |
| Finish | Blue or black anodized |
Vehicle fitment
It fits the 2002–2007 Dodge Ram 1500 in Laramie, SLT, ST and TRX4 trims.
The listed years cover only the 2002–2007 Ram 1500. Other Ram 1500 generations and other Dodge or Ram models are not covered by this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The shock mounts in the original location as well as several other configurations, so confirm which mounting setup your truck uses before installing. It is built for a 6 in. lift, so check that it matches your truck’s lift height.
What’s included
The shock is offered with or without a reservoir. Check the package contents against your installation before starting.
Not included: Confirm the reservoir option and mounting hardware for your order before installing.









