Overview
The K2134M is a multiple front shock system with Stealth Monotube Shocks for 2011–2015 Ford F-250 and F-350 Super Duty trucks. It mounts front shocks on 1.5 in. OD tubular components, installs bolt-on with no welding, and increases dampening capacity.
The system suits Super Duty owners who want a multiple-shock front setup on a bolt-on basis. Vehicle coverage is summarized in the Vehicle fitment section below.
Key features
- Multiple front shock system paired with Stealth Monotube Shocks
- 1.5 in. OD tubular construction
- Bolt-on installation with no welding
- Listed install time of 4 hours
- Described by Fabtech as increasing dampening capacity
Working safely at the front axle
Front shock work puts the truck in an unstable position, so set up before loosening anything. Use a sturdy floor jack and stands rated for the truck, and chock the rear wheels. Lower the axle slowly when removing a shock, because the spring stores energy and can move quickly once the mount is free.
Good preparation makes the install smoother. Lay out the packed parts before starting, and check that each bracket and fastener matches the drawings. Use a torque wrench for the final tightening, and check the clearance between the new shock and tire at full turn after the truck is back on the ground.
- Chock the rear wheels before lifting
- Set stands under the frame, not the axle
- Recheck fastener torque after the first drive
Specifications
| Brand | Fabtech |
|---|---|
| Part number | K2134M |
| UPC | 700007233791 |
| Position | Front |
| Tubing outside diameter | 1.5 in. |
| Shock type | Stealth Monotube |
| Installation | Bolt on, no weld, 4 hour install time |
Vehicle fitment
It is a direct fit for 2011–2015 Ford F-250 Super Duty and F-350 Super Duty trucks in King Ranch, Lariat, Platinum, XL and XLT trims.
The fitment does not include other Super Duty generations or other Ford truck models. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The install is bolt-on with no welding and takes 4 hours. Support the front axle on stands while the shocks are mounted, and confirm the shock length suits your suspension before final tightening.
What’s included
The system comes with Stealth Monotube Shocks. Compare the packed parts with the instructions before starting, including brackets and fasteners.









