Overview
The DS280 is a multiple shock bracket for the front axle that allows dual front shocks. It is a front-position bracket supplied without shocks, with a limited lifetime warranty.
No vehicle, mounting style or dimensions are named, so what follows is limited to what Skyjacker states.
Key features
- Multiple shock bracket for dual front shocks
- Front location and position
- Type: without shocks
- Limited lifetime warranty
- Direct-fit designation
Dual shock setup considerations
Running two shocks on the front axle adds damping control when the axle has more movement or weight, such as on a lifted truck with larger tires. The second shock mounts to the axle, so the bracket has to hold its position under load and clear the spring, brake hardware and steering components.
Before installing, check the axle’s bracket points, the shock lengths and the travel the new mount will allow. Inspect the bushings and mounts on the existing shock at the same time, since a loose mount can change how the second shock works. Re-check fasteners after the first few trail runs.
- Confirm shock length and stroke
- Inspect existing shock mounts and bushings
- Check clearance through full axle travel
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | DS280 |
| UPC | 803696127859 |
| Product type | Multiple shock bracket |
| Configuration | Dual front |
| Location / position | Front |
| Type | Without shocks |
| Warranty | Limited lifetime warranty |
| Fit type | Direct fit |
Vehicle fitment
Confirm fit for your vehicle’s year, model, trim and axle before ordering.
No vehicle fitment is stated. Confirm your vehicle’s year, model, trim and axle details with the manufacturer before ordering.
Installation notes
A dual-shock bracket changes how the front axle is damped, so professional installation is recommended. Raise the vehicle onto jack stands on level ground and never crawl beneath it with only a jack for support. Use the correct torque values on every fastener and re-check them after a short drive. Have the alignment inspected after the work, and verify that brake lines, cables and wiring clear everything throughout axle travel.
Shock brackets are often welded or bolted to the axle. Have a qualified installer weld the bracket if welding is needed, and confirm the mounting method before starting.
What’s included
One multiple shock bracket. Check the package contents against your installation before starting.
Not included: Shocks are not included, and the bracket is supplied without them.








