Overview
The K3044 is a multiple front shock system with Performance Shocks for 2009–2013 Ram 2500 and Ram 3500 trucks. It uses 1.5 in. OD tubular components and installs bolt-on without welding.
The kit is sold per axle and includes part number FTS53002. The design increases dampening capacity. Coverage spans 2009–2010 and 2011–2013 Ram models.
Key features
- Multiple front shock system with Performance Shocks
- Includes part number FTS53002
- 1.5 in. OD tubular construction
- Bolt-on, no-weld installation with a 4 hour install time
- Listed per axle
Heavy-duty front suspension notes
Ram 2500 and 3500 trucks carry heavy loads, and the front suspension sees that weight through every turn and stop. Performance shocks help control body motion when the truck is loaded, towed or driven over uneven ground. Matching the damping to how the truck is used makes a bigger difference than chasing a single feature.
Front shock mounts and the surrounding hardware should be inspected before and after the install. Look for worn bushings at the shock eyes, cracked welds on any brackets, and fasteners that have stretched. Tire wear that is heavier on one side can be a sign of an alignment or shock problem, so check the front end after work is complete.
- Check shock eye bushings for cracks or flattening
- Inspect bracket welds for hairline cracks
- Confirm alignment after changing front shocks
Specifications
| Brand | Fabtech |
|---|---|
| Part number | K3044 |
| UPC | 70000583732 |
| Position | Front |
| Shocks | Performance Shocks |
| Included part number | FTS53002 |
| Tubing outside diameter | 1.5 in. |
| Basis | Per axle |
| Installation | Bolt on, no weld, 4 hour install time |
Vehicle fitment
It is a direct fit for 2009–2010 Dodge Ram 2500 and 3500 trucks and for 2011–2013 Ram 2500 and 3500 trucks. Trims run from SLT, ST and SXT up to Laramie, Power Wagon, Laramie Longhorn and TRX, depending on model and year.
Light-duty Ram models and newer Ram generations are not part of this coverage. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Installation is bolt-on with no welding, and Fabtech gives a 4 hour install time. Chock the wheels and support the truck on stands before working on the front suspension.
What’s included
The kit includes Performance Shocks and part number FTS53002. Check the packed parts against the instructions for brackets and hardware before starting.









