Overview
The FTS1002 is a front control arm bushing kit of black polyurethane replacement bushings for multiple Chevy applications. It is a half bushing kit, so two bushings are needed for each joint.
The bushings help control wheel hop, increase cornering control and maintain proper caster and camber.
Key features
- Half bushing kit; two bushings are needed for each joint
- Black polyurethane construction
- Front position
- Replacement bushings for multiple Chevy applications
- Helps control wheel hop and increase cornering control
Front joint service planning
Front control arm bushings are usually pressed in or out with the arm removed, and the process depends on the arm design. Plan for a press or a shop tool if the old bushings are seized in place. Working on a clean bench with the arm supported makes it easier to seat the new parts square.
Because each joint needs two bushings, count the joints on your truck before buying. Replacing both sides of an axle at once keeps the suspension evenly matched, and it avoids returning soon for the other side. Inspect the ball joints and mounting holes while the arm is off, since worn holes can make a new bushing sit loosely.
- Count joints before ordering
- Clean mounting bores before pressing
- Lubricate the bushing as the instructions advise
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FTS1002 |
| UPC | 674866002074 |
| Color | Black |
| Type | Polyurethane |
| Position | Front |
| Bushings per joint | 2 |
Vehicle fitment
It is offered for multiple Chevy applications. Confirm model years, models and trims against your truck or SUV before ordering, because control arms differ between generations.
Chevy control arms differ from one generation to another, so match the kit to your truck or SUV by year and model before installing. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Plan on two bushings for every joint you service, so the number of kits you need depends on how many joints are being replaced.
What’s included
Two bushings are needed for each joint. Plan the number of kits around how many joints you are replacing.






