Overview
The Fabtech FTS1108 is a raw control arm bushing kit made from black polyurethane for suspension control arms. Control arm bushings sit where the arms connect to the chassis, so they influence steering and handling. The kit helps control wheel hop, improves cornering control and helps maintain proper caster and camber.
The kit has a raw color finish. It is universal fit, and control arm bushings are sized for particular suspension components, so confirm the vehicle application before installing.
Key features
- Made from high quality black polyurethane
- Helps control wheel hop
- Supports cornering control
- Helps maintain proper caster and camber
- Raw color finish
Raw finish and installation prep
A raw finish leaves the bushing kit unpainted or uncoated, so it may look different from finished parts when installed. The look does not change how the bushings work, but the parts should be handled and stored with care before installation. Keep them clean and dry until the arms are ready.
Control arm bushings are pressed or pulled into the arm bores, so the fit must be clean and square. Check the bores for rust, burrs or distortion before starting. Use the correct installation tools, since forcing a bushing in at an angle can split the sleeve or damage the arm.
Replacing bushings on both sides of an axle keeps wear even. After installation, re-check fasteners after the first few drives and have caster and camber checked, since arm work can move these settings.
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FTS1108 |
| UPC | 674866002289 |
| Color | Raw |
| Material | Black polyurethane |
| Type | Polyurethane control arm bushing kit |
Vehicle fitment
Universal fit, so no vehicle years, models or chassis codes are named. Confirm the bushings fit your year, make, model and trim before installing.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
Not included:







