Overview
The Fabtech FTS97159-7 is a 3.5 inch lift spindle sold as a black pair. It is a one-piece cast spindle that replaces the factory spindle directly, so installation does not require welding. It is designed to work with Fabtech Performance Lift Systems or a stock OEM suspension, and it accepts stock wheels and tires. Verify the match for your year, model and trim before buying.
Key features
- One-piece cast construction
- Replaces the factory spindle directly, with no-weld installation
- Engineered to accept factory ball joints
- Compatible with Fabtech Performance Lift Systems or stock OEM suspension, per the manufacturer
- It accepts stock wheels and tires.
- It adds front end ground clearance without changing factory handling characteristics.
Before you install
A lift spindle changes the geometry at the front axle, so the parts around it are worth inspecting before and after installation. Check the ball joints, tie rod ends, brake lines and CV axle angles while the knuckle is off. Stretched brake lines and binding axles are common issues after a front lift, and a careful look at these parts can prevent a rushed repair on the trail.
Because a spindle sets the wheel position, a wheel alignment should be done once the new parts are in place. Torque the fasteners to the specification in the service manual for your vehicle, and recheck them after the first few drives. Keep the factory parts until the lift has been driven for a while, in case a fitment issue needs a return.
- Inspect ball joints and tie rod ends at installation
- Check brake line length and flex after the lift
- Plan a wheel alignment after the first drive
- Confirm wheel and tire clearance at full steering lock
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FTS97159-7 |
| UPC | 674866005303 |
| Lift height | 3.5 inch |
| Lift height range | 3 to 4.99 inches |
| Color | Black |
| Sold as | Pair |
| Suspension type | Knuckle |
| Rear lift method | None |
| Shocks included | No |
Vehicle fitment
Lift spindles are sized for particular vehicles, so a Universal Fit label alone does not confirm a match. Verify the year, model and trim against your truck before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The spindles are designed to accept factory ball joints. Because a lift changes suspension geometry, plan on a wheel alignment after installation.
What’s included
The spindles are sold as a pair.
Not included: shocks.









