Overview
The Fabtech FTS1599-7 is a 3 inch lift spindle for 1999–2006 Chevrolet Silverado 1500 and GMC Sierra 1500 trucks. It also fits 2000–2006 Chevrolet Suburban 1500, Tahoe and GMC Yukon XL 1500, and 2002–2006 Chevrolet Avalanche 1500.
Each spindle is one-piece cast and engineered to accept the factory ball joints. The spindles raise the front end for added ground clearance and accept stock wheels and tires.
Key features
- 3 inch lift height
- Driver’s side and passenger’s side spindles
- One-piece cast construction
- Engineered for the factory ball joints
- Accepts stock wheels and tires
- Works with Fabtech Performance Lift Systems or a stock suspension
Choosing a lift height
A 3 inch spindle lift raises the front end and changes the angle of the front axle and driveline relative to the rear. Many owners find this is enough for larger tires without a full suspension rebuild, but the added height also changes how the truck sits on the road and how it rolls in turns.
Before buying, measure the current height of the front end and decide how much of your tire clearance target the spindles need to cover. Lift spindles are often paired with new shocks, brake lines long enough for the new geometry, and a check of the steering components. Look for bent or worn ball joints and tie rod ends when the old parts come off.
- Check shock length against the new ride height
- Inspect brake hoses after the lift
- Re-torque wheel bolts after the first drives
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FTS1599-7 |
| UPC | 674866002937 |
| Lift height | 3 inch |
| Lift height range | 3 to 4.99 inches |
| Included spindles | Driver’s side and passenger’s side |
| Suspension type | Knuckle |
| Rear lift method | None |
| Shocks included | No |
Vehicle fitment
The manufacturer fitment list covers 1999–2006 Chevrolet Silverado 1500 (Base, LS, LT, WT) and GMC Sierra 1500 (Base, HT, SL, SLE, SLT, WT), 2000–2006 Chevrolet Suburban 1500 and Tahoe, 2000–2006 GMC Yukon XL 1500, and 2002–2006 Chevrolet Avalanche 1500.
Vehicles from 2007 and later, and models outside this list such as the 1988–1998 C/K trucks, are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The spindles replace the factory spindles without welding, so installation needs no cutting or welding. Because they raise the front end, have the front alignment checked afterward and make sure your shocks suit the added height.
What’s included
A driver’s side spindle and a passenger’s side spindle.
Not included: Shock absorbers.









