Overview
The Fab Fours Vengeance Series Front Bumper with Pre-runner Guard in black, part number FS17-V4152-1, is a light weight steel front bumper in a Pre-runner guard layout. The finish is a 2 stage black powder coat.
The fit is high and tight to the contours of the vehicle. A center cutout takes a 20 inch LED light bar, and two 2×2 Dually lights can mount on each side.
The Vengeance Series is a line of light weight bumpers with a sleek, stylish finish for the front and rear of a vehicle. This is the Pre-runner guard version, and the line is also offered with no guard. The side mounts give broad LED coverage with 2×2 Dually lights, and the lower cutout gives an aggressive look on and off the road.
Key features
- Pre-runner guard version of the Vengeance bumper
- High and tight fit to the contours of the vehicle
- 65 lbs without a guard, 75 lbs with the Pre-Runner guard
- Center mount for a Rigid Industries 20 inch LED light bar
- Side mounts for two 2×2 Dually lights
- Lower cutout for airflow
- 11 ga. U.S. steel with black powder coat
- Bolt-on brackets that tie to the frame
Frame-tied bumper fitment
A bolt-on bumper that ties into the frame transfers load into the chassis, so the frame contact points and bracket bolts should be inspected after the first few drives. Front bumpers also sit in front of radar and camera sensors on many trucks, and their position can affect detection. Check the sensor area for a clear view once the bumper is fully bolted on.
Powder coat finishes resist chips well when they are kept clean, but gravel and brush strikes can still expose bare steel. Touch up chips with a matching paint and clean the mounting surfaces before reattaching brackets. Good bolt tightness and periodic checks help keep the bumper stable on rough roads.
- Inspect frame brackets after rough trips
- Confirm sensors have a clear view
- Touch up chips before rust starts
- Check light bar mounts before wiring
Specifications
| Brand | Fab Fours |
|---|---|
| Series | Vengeance Series |
| Part number | FS17-V4152-1 |
| UPC | 5810112417 |
| Part type | Front bumper with Pre-runner guard |
| Material | 11 ga. U.S. steel |
| Finish | 2 stage black powder coat |
| Weight, no guard | 65 lbs |
| Weight, Pre-Runner guard | 75 lbs |
| Winch mount | Not included |
| D-ring mounts | Not included |
| Light bar mount | Center mount for a 20 inch LED light bar |
| Fit style | Direct fit |
Vehicle fitment
This bumper is a direct fit. Check the year, model and trim of your truck before ordering.
No vehicle is named for FS17-V4152-1, so check Fab Fours’ specifications for the truck it matches. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
This is a complete bolt-on front bumper, with brackets provided that tie directly to the frame.
What’s included
- Vengeance front bumper with Pre-runner guard
- Mounting brackets
Not included: the 20 inch LED light bar and the 2×2 Dually lights.














