Overview
The Fab Fours Vengeance GM15-V3152-1 is a Pre-Runner front bumper for the 2015 to 2018 GMC Sierra 2500 HD and 3500 HD. It is a non-winch steel bumper from the Vengeance Series with a 2 stage black powder coat.
The bumper is built to be light weight, at 65 lbs without a guard and 75 lbs with the Pre-Runner guard. It has a place for an integrated 20-inch LED light bar in the center and mounting options on each side for two 2×2 Dually lights. The lower cutout provides airflow to the intercoolers.
The bumper is complete and bolt-on, with brackets that tie directly to the frame. The sensor version of this series is not available for the 2015 Chevy HD.
Key features
- Pre-Runner Vengeance front bumper for 2015 to 2018 GMC Sierra 2500 HD and 3500 HD
- Non-winch design in 12 ga. U.S. steel
- Integrated 20-inch LED light bar position in the center (light bar not included)
- Side mounting options for two 2×2 Dually lights each
- Lower cutout provides airflow to the intercoolers
- Bolt-on brackets that tie directly to the frame
- 2 stage black powder coat
- Weighs 75 lbs with the Pre-Runner guard.
- Made in the USA
Light bar and airflow planning
A center light bar sits behind the bumper face and needs a clear mounting area, wiring path and fuse protection. Plan the wiring before mounting the bar, and route the harness away from the lower cutout so it stays out of airflow and road debris. Side Dually light mounts work the same way, so place each light to suit the bumper curve and the lights’ beam.
Airflow matters on a heavy duty truck that runs heavy loads. The lower cutout feeds air to the intercoolers, so keep it clear of mud and debris and avoid blocking it with added accessories. Check the light bar and side lights for loose brackets after rough terrain, and re-check the bumper bolts after the first few trips. Non-winch bumpers rely on the tow and D-ring mounts for recovery, so inspect those mounts before each use.
Specifications
| Brand | Fab Fours |
|---|---|
| Part number | GM15-V3152-1 |
| UPC | 5810110550 |
| Product type | Front bumper with Pre-Runner guard, non-winch (Vengeance Series) |
| Position | Front |
| Width | Full |
| Material | Steel, 12 ga. U.S. steel |
| Finish | 2 stage black powder coat |
| Weight | 75 lbs with Pre-Runner guard (65 lbs without guard) |
| Light bar position | Center, for a 20-inch LED light bar |
| Side light mounts | Two 2×2 Dually lights per side |
| D-ring mounts | Included |
| Winch mount | Not included |
Vehicle fitment
The GM15-V3152-1 is listed by Fab Fours for the 2015 to 2018 GMC Sierra 2500 HD and 2015 to 2018 GMC Sierra 3500 HD.
Sierra 1500 and earlier heavy duty trucks fall outside these years. Make sure your truck’s year, model and trim match before ordering.
Installation notes
This is a complete bolt-on bumper. The brackets tie directly to the frame, and the lights and light bar need their own wiring.
What’s included
- Front bumper with Pre-Runner guard
- Frame-mounting brackets
- D-ring mounts
Not included: The LED light bar, the Dually lights and any winch.














