Overview
The Fab Fours Vengeance Series Pre-Runner Front Bumper in black, part number CH11-V2752-1, is a lightweight steel front bumper for the 2011–2014 Chevrolet Silverado 2500 HD and 3500 HD. It is a non-winch bumper with a pre-runner guard and a matte black powder-coat finish.
The Vengeance Series is a lightweight line of steel bumpers, and this model weighs 75 lbs with the pre-runner guard. The bumper is engineered to keep factory features such as Adaptive Cruise Control and Park Assist, with an optional bracket for Park Assist.
Key features
- Vengeance Series lightweight steel bumper with a pre-runner guard
- High and tight fit to the contours of the vehicle
- Lightweight: 65 lbs with no guard, 75 lbs with pre-runner guard.
- Center mount for a Rigid Industries 20 inch LED light bar, not included
- Side mounts for two 2×2 Dually lights each, not included
- Optional mesh inserts for the center cutout (M2450-1) and side openings (M2550-1)
- Keeps Adaptive Cruise Control and Park Assist, with an optional bracket
- Complete bolt-on bumper with brackets that tie directly to the frame
- 11 ga. U.S. steel in a two-stage matte black powder coat
Pre-runner guard considerations
A pre-runner guard protects the grille and front lights from brush and small impacts without adding a winch tray. Because the guard sits forward of the factory bumper, the light mounts and brackets should be checked for clearance with the hood and grille once installed. Keep the bolts snug, since a bumper that shifts can rub on the radiator support or hood latch.
Lighter steel bumpers can flex more under load than heavy plate designs, so check the frame brackets periodically. Look for cracked welds, loose bolts and paint chips near the mounting points. Keep the area around the front sensors free of mud and dirt after off road trips, so the driver assist features keep working as intended.
- Recheck frame bracket bolts after rough trips
- Keep the cruise sensor area free of debris
- Inspect light mounts for cracks after impacts
Specifications
| Brand | Fab Fours |
|---|---|
| Part number | CH11-V2752-1 |
| UPC | 5810114428 |
| Product type | Vengeance Series front bumper |
| Guard style | Pre-runner guard |
| Position | Front |
| Width | Full |
| Material | 11 ga. U.S. steel |
| Finish | Two-stage matte black powder coat |
| 75 lbs with pre-runner guard | |
| Light mounts | Included |
| Winch mount | Not included |
| D-ring mount | Not included |
| Fitment type | Direct fit |
Vehicle fitment
The bumper is a direct fit for the 2011–2014 Chevrolet Silverado 2500 HD and 3500 HD.
Other Silverado model years and the Silverado 1500 are not on the list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
It is a complete bolt-on bumper, and brackets tie it directly to the frame. Keeping Park Assist requires an optional bracket, which is sold separately.
What’s included
The bumper with its frame brackets and light mounts.
Not included: The 20 inch LED light bar, the 2×2 Dually lights, the optional mesh inserts and the optional Park Assist bracket.














