Overview
The Fab Fours GM14-C3150-1 is a front winch bumper with sensor holes and a full guard for the 2015 to 2018 GMC Sierra 2500 HD and 3500 HD. It is a steel bumper with a black powder coat and a winch tray that takes winches of up to 16,500 lb.
Fab Fours says its Premium winch bumpers now have a redesigned center section with four integrated sensor holes that work with factory equipped sensors. The holes are laser cut with the factory pattern and are compatible with the OEM sensor housing, so front and rear matching steel bumpers will work with the factory park assist system.
The internal winch tray has a new D-ring and fairlead location, and access slots in the lower part of the tray let the factory sensor harness pass through.
Key features
- Full guard winch bumper with sensor holes for 2015 to 2018 GMC Sierra 2500 HD and 3500 HD
- Four laser cut sensor holes in the factory pattern for park assist
- Compatible with the OEM sensor housing
- Internal winch tray with access slots for the factory sensor harness
- Winch ready for winches up to 16,500 lb
- 3/4-inch D-ring mounts
- 90mm fog lights and 60mm turn indicators included
- Adjustable 1/4-inch boxed mounting system, 1/4-inch and 3/16-inch steel
- Made in the USA
Sensor wiring and park assist care
Park assist sensors work with the bumper only when the housings sit in the right position and the harness has a clean path. Check that the sensor housings seat fully in their holes, and keep the harness routed through the access slots so it does not pinch against the steel. A pinched or kinked harness can cause sensor faults that look like a bumper problem but are really wiring issues.
Care for the sensor area is simple. Clean the holes and housings after mud or road salt exposure, and check the seals for cracks. Any new sensor or bracket should match the factory housing, so compare parts before fitting them. When a truck is serviced, re-check the harness path, since bodywork repairs can shift the routing and change how the sensors read.
Specifications
| Brand | Fab Fours |
|---|---|
| Part number | GM14-C3150-1 |
| UPC | 5810109486 |
| Product type | Front winch bumper with sensor holes and full guard |
| Position | Front |
| Width | Full |
| Material | Steel, 1/4-inch and 3/16-inch combination |
| Finish | 2 stage matte black powder coat |
| Winch capacity | 16,500 lb winch or smaller |
| D-ring mounts | 3/4-inch |
| Lights | 90mm fog lights and 60mm turn indicators |
| Sensor holes | Four, laser cut, factory pattern |
| Winch mount | Included |
Vehicle fitment
It is a direct-fit front bumper for the 2015 to 2018 GMC Sierra 2500 HD and 2015 to 2018 GMC Sierra 3500 HD.
Sierra 1500 trucks and earlier heavy duty generations fall outside these years. Make sure the year, model and trim match your truck before ordering.
Installation notes
Route the factory sensor harness through the access slots cut into the lower part of the winch tray. The boxed mounting system adjusts for a custom fit.
What’s included
- Front winch bumper with full guard
- Winch mount
- 90mm fog lights
- 60mm turn indicator lights
- Sensor holes cut to the factory pattern
Not included: The winch, the factory sensors and wiring.









