Overview
The Fab Fours Vengeance GM11-V2852-B is a Pre-Runner front bumper in bare steel for the 2011 to 2014 GMC Sierra 2500 HD and 3500 HD. It is part of the Vengeance Series of lightweight steel bumpers, and the -B in the part number marks the bare steel finish.
The bumper has a high, close fit to the contours of the truck’s front end. The center cutout takes a 20-inch LED light bar from Rigid Industries, and each side has mounting options for two 2×2 Dually lights. The lights are not included, and a lower cutout provides airflow.
The bumper is designed to keep Adaptive Cruise Control and Park Assist working when an optional bracket is added, and the bracket is sold separately. Optional mesh inserts M2450-1 for the center and M2550-1 for the sides are available. It weighs 75 lbs with the Pre-Runner guard and 65 lbs without it.
Key features
- Pre-Runner Vengeance front bumper for 2011 to 2014 GMC Sierra 2500 HD and 3500 HD
- Bare steel finish, 11 ga. U.S. steel
- Center mount for a Rigid Industries 20-inch LED light bar (not included)
- Side mounting options for two 2×2 Dually lights (not included)
- Lower cutout for maximum airflow
- Optional mesh inserts M2450-1 (center) and M2550-1 (side)
- Complete bolt-on design with brackets that tie directly to the frame
- Made in the USA
Finishing bare steel
Bare steel is ready for a finish of your choice, but it needs protection before the truck sees weather. Clean the metal, remove any mill scale and apply a primer that bonds to steel. Once primed, a topcoat in a color that suits the truck will keep moisture off the surface and slow rust at the welds and bracket edges.
Plan the finish around the accessories. Light bar and Dually light mounts sit on the bumper face, so mask those areas before painting and keep wiring clear of the spray. Mesh inserts, if added, can be painted separately, which lets the bumper and inserts match or contrast. Inspect the finish each season and touch up chips quickly, especially along the lower cutout where road debris strikes.
Specifications
| Brand | Fab Fours |
|---|---|
| Part number | GM11-V2852-B |
| UPC | 5810114299 |
| Product type | Front bumper with Pre-Runner guard (Vengeance Series) |
| Position | Front |
| Width | Full |
| Material | Steel, 11 ga. U.S. steel |
| Finish | Bare steel |
| Weight | 75 lbs with Pre-Runner guard (65 lbs no guard) |
| Light bar cutout | Center mount for a Rigid Industries 20-inch LED light bar |
| Side light mounts | Two 2×2 Dually lights per side, mounts included |
| Winch mount | Not included |
| D-ring mounts | Not included |
| Optional mesh inserts | M2450-1 (center), M2550-1 (side) |
Vehicle fitment
It is a direct-fit front bumper for the 2011 to 2014 GMC Sierra 2500 HD and 2011 to 2014 GMC Sierra 3500 HD.
Other Sierra models and heavy duty generations are outside these model years. Check the year, model and trim against your vehicle before ordering.
Installation notes
This is a bolt-on bumper; its brackets tie directly to the truck’s frame. Bare steel is supplied without a powder coat, so plan on finishing it as you prefer.
What’s included
- Front bumper with Pre-Runner guard
- Frame-mounting brackets
- Center light bar bracket
Not included: The LED light bar, the Dually lights, the optional mesh inserts and the adaptive cruise control bracket.
















