Overview
The Fab Fours FFICH20-V4951-1 is a black steel Vengeance Series front bumper for the 2020–2022 Chevrolet Silverado 2500 HD and 3500 HD. The Vengeance Series is designed to be light weight, with a sleek finish for the front and rear of the truck.
The bumper has an integrated 20-inch LED light bar housing in the center and mounting positions on each side for two 3×3 LED lights. The fit is high and tight, with lower cutouts for airflow. It is not winch mount compatible and is offered with no guard or a pre-runner guard.
The center light bar housing is built into the bumper, so a 20-inch LED light bar mounts directly in it. The light bar itself is a separate purchase.
Key features
- Integrated 20-inch LED light bar housing in the center
- Mounting positions on each side for two 3×3 LED lights
- Light mounts included
- High, tight fit with lower cutouts for airflow
- Full width design, steel construction
- Available with no guard or a pre-runner guard
Planning heavy-duty lighting
Front lighting on a heavy-duty truck works best when the light pattern, mounting height and wiring are planned together. A center light bar gives long reach down the trail, while side pods help with wide coverage at low speeds. Consider where each light will sit relative to the grille and whether the beams will be blocked by the hood or mirrors.
LED lights draw less current than older lamps, but a long run of wire can still lose voltage. Use a relay close to the battery, size the wire for the load and fuse each circuit. Aim lights after mounting, and recheck the aim after the truck has been on rough roads, because vibration can shift the brackets over time.
- Use a relay and fuse for each light circuit
- Aim lights on level ground after installation
- Check wire routing for heat and abrasion
- Recheck aim after rough-road driving
Specifications
| Brand | Fab Fours |
|---|---|
| Part number | FFICH20-V4951-1 |
| Finish | Black |
| Material | Steel |
| Width | Full |
| Position | Front |
| Winch mount | Not compatible |
| Light mounts | Included |
| Hoop | Not included |
| Stinger | Not included |
| Fitment | 2020–2022 Chevrolet Silverado 2500 HD and 3500 HD |
Vehicle fitment
It is a front bumper for the 2020–2022 Chevrolet Silverado 2500 HD and 3500 HD.
The list does not include the Silverado 1500, any GMC Sierra, or model years 2019 and earlier. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The fit is high and tight, so route the LED wiring through a fused relay and check local rules for auxiliary lights before road use.
What’s included
Front bumper with light mounts for the center light bar housing and the side 3×3 positions.
Not included: The light bar and the 3×3 LED lights are sold separately.
