Overview
The Fab Fours DR10-V2952-1 is a Vengeance Series pre-runner front bumper in black powder coat, made for 2010 to 2018 Ram 2500 and 3500 trucks.
Pre-runner guard styling sets this Vengeance bumper apart from the no guard version, while it keeps the same lightweight steel build. The pre-runner guard version weighs 75 lb, compared with 65 lb with no guard. It is a non-winch design with a center spot for a 20-inch LED light bar. The fit is high and tight, and the lower cutouts give the front end an aggressive look on and off the road.
Key features
- Pre-runner guard version, 75 lb
- Center mounting for a 20-inch LED light bar (not included)
- Two 2×2 Dually light positions, one on each side
- Intercooler airflow cutout in the lower section
- Brackets that bolt directly to the frame
- Two-stage black powder coat
- 11 ga. U.S. steel
- Non-winch design
- Fit described by Fab Fours as high and tight to the truck
Weight and pre-runner guards
Front weight changes how a truck feels on the road. Extra mass on the nose shifts load toward the front axle, which can affect steering response, braking distance and suspension wear over time. Owners who add accessories such as a winch, lights or a heavier guard often find it useful to review the whole front end at the same time.
Pre-runner guards add protection for the grille, headlights and radiator area during rough trail use, but they also take brush and rock strikes. Inspect the bumper, brackets and guard welds after hard trail days, and tighten any mounting hardware that has worked loose. Worn bushings and steering joints can also make a heavier nose feel loose, so check them on a regular schedule.
- Review brake pads and rotors after adding front weight
- Check tires and load rating before heavy accessories
- Look over steering joints at each service
- Keep guard welds clear of mud and salt
Specifications
| Brand | Fab Fours |
|---|---|
| Part number | DR10-V2952-1 |
| UPC | 5810110895 |
| Type | Vengeance pre-runner front bumper |
| Position | Front |
| Width | Full |
| Material | Steel, 11 ga. U.S. steel |
| Finish | Two-stage black powder coat |
| Weight | 75 lb with pre-runner guard |
| Fit type | Direct fit |
| Light mounts | Included |
| Winch mount | Not included; non-winch bumper |
Vehicle fitment
This bumper is a direct fit for the 2010 Dodge Ram 2500 and 3500 and for the 2011 to 2018 Ram 2500 and 3500.
No Ram 1500 or 2019 and newer heavy-duty application is listed. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
This is a complete bolt-on kit, and the supplied brackets attach directly to the frame of the truck, so no extra mounting hardware is described. Lights fitted to the center and side mounts need their own fused wiring. Keep the lower cutout clear of obstructions after lights are added, because that opening exists to pass air to the intercooler on the truck.
What’s included
- Vengeance pre-runner front bumper
- Frame brackets
Not included: The LED light bar and the Dually lights.
















