Overview
The Fab Fours Vengeance front bumper with Pre-runner guard, part number TT16-D3652-1, is built for the 2016 Toyota Tacoma. It is made from 11 ga. steel as a lightweight bumper with a sensor-style design.
The bumper has a high and tight fit to the contours of the truck. A lower cutout supplies airflow, and the brackets provided tie directly to the frame.
This Tacoma bumper keeps the styling Fab Fours describes for the Vengeance line: a sleek and stylish finish with an aggressive look both on and off the road. The 2 stage black powder coat covers 11 ga. U.S. steel. The center mount allows a Rigid Industries 20 inch LED light bar, and each side accepts two 2×2 Dually lights for maximum LED light coverage. The light bar and the lights are not included with the bumper.
Key features
- Made for the 2016 Toyota Tacoma
- Pre-runner guard version
- High and tight fit to the contours of the vehicle
- Center mount for a Rigid Industries 20 inch LED light bar
- Side mounting options for two 2×2 Dually lights
- Lower cutout to provide airflow
- Complete bolt-on with brackets to the frame
- 11 ga. U.S. steel with 2 stage black powder coat
Pre-runner guards and light mounts
A pre-runner guard sits in front of the grille and headlights, so it takes the impact from brush, rocks and small trees. The guard also adds weight at the front of the truck, which affects the front suspension and steering feel. Tire and suspension settings should be checked once the bumper is fitted.
A light bar on the center mount adds electrical load and needs a proper relay and fused feed. Wiring should be routed away from the bumper’s moving parts and sharp edges. Side lights mounted on the bumper should be aimed after installation, and the aim should be checked again after a long trip over rough ground.
- Check front suspension alignment after fitting
- Use a relay and fused feed for lights
- Route wiring away from sharp edges
- Re-aim lights after rough trips
Specifications
| Brand | Fab Fours |
|---|---|
| Series | Vengeance Series |
| Part number | TT16-D3652-1 |
| UPC | 5810111472 |
| Part type | Front bumper with Pre-runner guard |
| Material | 11 ga. U.S. steel |
| Finish | 2 stage black powder coat |
| Weight, no guard | 65 lbs |
| Weight, Pre-Runner guard | 75 lbs |
| Light bar mount | Center mount for a 20 inch LED light bar |
| Side light mounts | 2×2 Dually lights, two per side |
| Winch mount | Not included |
| D-ring mounts | Included |
| Origin | Made in the USA |
Vehicle fitment
It is made for the 2016 Toyota Tacoma.
Other Tacoma model years are not covered. Check your year, model and trim against this fitment before buying.
Installation notes
The brackets provided tie to the frame. Lights and the light bar are added separately.
What’s included
- Vengeance front bumper with Pre-runner guard
- Mounting brackets
Not included: the 20 inch LED light bar and the 2×2 Dually lights.
