Overview
The Fab Fours FS11-A2552-1 is a Pre-Runner heavy duty winch front bumper with lights and D-ring mounts for the 2011 to 2016 Ford F-250 Super Duty and F-350 Super Duty. It is made of steel with a black powder coat.
Fab Fours says its Premium winch bumper focuses on strength and durability and provides more tire clearance so tires do not rub. The bumper accepts winches of 16,500 lb or smaller and includes 3/4-inch D-ring mounts, integrated fog and turn lights, and air ducts.
An adjustable 1/4-inch boxed mounting system lets the owner set a custom fit, and the light housings are injection molded.
Key features
- Pre-Runner winch bumper for 2011 to 2016 Ford F-250 and F-350 Super Duty
- Winch ready for winches up to 16,500 lb
- 3/4-inch D-ring mounts included
- 90mm fog lights and 60mm turn lights included
- Injection molded housings with air ducts
- Adjustable 1/4-inch boxed mounting system
- Combination of 1/4-inch and 3/16-inch steel
- Matte black powder coat; the -B suffix means bare steel
- Made in the USA
Choosing a guard style
A front bumper guard protects the lower body and the corners from brush and rock contact, and the style you pick should match the terrain you drive. Pre-Runner guards are open designs that shield the corners and lower bumper area while leaving more of the grille exposed than a full guard does. They suit trucks used on desert trails and light brush, where clearance and airflow matter.
Whatever guard style is chosen, the bumper must clear the hood, radiator and any front sensors. Check the hood closes without contact, and make sure the lights and winch do not block cooling airflow. Bumper guards add weight and change the front profile, so re-check tire clearance at full steering lock after installation.
- Compare guard coverage with your typical trails
- Check hood and radiator clearance
- Keep the grille area clear of debris
- Recheck tire clearance at full lock
Specifications
| Brand | Fab Fours |
|---|---|
| Part number | FS11-A2552-1 |
| UPC | 5810100650 |
| Product type | Heavy duty winch front bumper with Pre-Runner guard |
| Position | Front |
| Width | Full |
| Material | Steel, 1/4-inch and 3/16-inch combination |
| Finish | 2 stage matte black powder coat |
| Winch capacity | 16,500 lb winch or smaller |
| D-ring mounts | 3/4-inch, included |
| Lights | 90mm fog lights and 60mm turn indicators, included |
| Winch mount | Included |
Vehicle fitment
It fits the 2011 to 2016 Ford F-250 Super Duty and F-350 Super Duty. It is not made for earlier or later Super Duty generations.
It is not made for earlier or later Super Duty generations. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The mounting system adjusts for a custom fit. A winch bolts to the integrated tray, and the supplied lights need to be connected to the truck.
What’s included
- Front winch bumper with Pre-Runner guard
- D-ring mounts
- 90mm fog lights
- 60mm turn indicator lights
- Winch mount
Not included: The winch and its wiring.
















