Overview
The Energy Suspension 3.3185G is a black polyurethane half control arm bushing set. It covers a setup where the front upper or rear lower control arm is aftermarket and already uses polyurethane bushings, so the stock arms can match.
The set is sold as universal fit, with no specific vehicle identified. Check your arm layout before ordering.
Key features
- Half set rather than a full set
- Black polyurethane construction
- Stock arms receive polyurethane bushings, per the brand
- Universal Fit label
Ride and handling trade-offs
Bushings sit between the frame and the arm, so every change in material shows up in how the vehicle rolls, brakes and tracks. Firmer bushings tighten the connection and sharpen response, but they pass more impact through the chassis. Softer parts ride more quietly but allow more movement under load, which can blur steering feel at speed.
Think about where the vehicle spends its time. Mostly highway driving tolerates firm bushings well, while frequent rock crawling may call for something with more give at the joints. Whatever the choice, the surrounding parts matter, because worn joints and loose hardware undo the gains from any bushing set.
- Consider your mix of pavement and trail use
- Inspect joints and hardware when fitting new bushings
- Expect more noise over rough roads
Specifications
| Brand | Energy Suspension |
|---|---|
| Part number | 3.3185G |
| UPC | 703639738213 |
| Color | Black |
| Material | Polyurethane |
| Set type | Half set |
| Fitment label | Universal Fit |
Vehicle fitment
No vehicle is identified for this half set. Compare your control arm layout with the bushings before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Fit the bushings only to the stock arms left in place after the aftermarket arm is installed.
What’s included
A polyurethane bushing set for the stock arms left in place. Count the pieces on arrival against your installation plan.
Not included: Control arms and the aftermarket arm.









