Overview
The Energy Suspension control arm bushing set in red, part number 4.3157R, is a front polyurethane half set for Ford Explorer, Explorer Sport, Explorer Sport Trac and Ranger trucks, plus several Mazda B-series trucks and the 1997 to 2001 Mercury Mountaineer. It fits model years 1995 to 2011 in the trims named in the fitment.
When an aftermarket arm with polyurethane bushings is already fitted at the front upper or rear lower location, this set goes into the stock arms that remain. The result is polyurethane in the stock arms as well, so the bushing material matches across the arms.
The upper arm reuses all of its existing hardware, so the original metal pieces go back in with the new bushings. The polyurethane bushings sharpen steering response and handling control, help keep caster and camber steady, and reduce wheel hop.
Key features
- Front polyurethane half set for stock control arms
- Upper arm reuses all hardware
- Red finish
- Fits Ford, Mazda and Mercury trucks, 1995 to 2011
- Part number 4.3157R
Front end wear and bushing choice
The front control arms guide the wheels up and down and keep the axle steady under load. When the bushings in those arms soften or crack, the wheels can move out of their intended path, and the truck may feel loose on rough roads. A half set addresses only the stock arms that remain, so the worn ones should be inspected before any new parts go in.
Polyurethane is a firmer material than the rubber used in many original bushings, so the arm moves less under load. That firmness can make small road impacts feel sharper, which is worth considering if the truck sees mostly highway miles. Many owners pair bushing work with new ball joints and a steering check, since the whole front end works as one system.
- Inspect the arm pivots for play before installing
- Match the arm position on each side to the truck
- Check steering alignment after the arms are replaced
- Keep the original upper arm hardware for installation
Specifications
| Brand | Energy Suspension |
|---|---|
| Part number | 4.3157R |
| Position | Front |
| Type | Half set, polyurethane |
| Color | Red |
| Hardware | Upper arm reuses all hardware |
| Fit | Direct fit |
Vehicle fitment
It fits 1995 to 2001 Ford Explorer, 1995 to 2003 Explorer Sport, 2001 to 2005 Explorer Sport Trac, 1998 to 2011 Ford Ranger, 2001 to 2009 Mazda B2300, 1998 to 2001 Mazda B2500, 1998 to 2007 Mazda B3000, 1998 to 2009 Mazda B4000 and 1997 to 2001 Mercury Mountaineer models, with the trims named in the fitment.
Ford F-150 and Expedition models are not in this fitment. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Reuse all of the upper arm’s hardware with the new bushings. Match the arm positions to your truck before starting the job.
What’s included
The red front half set of polyurethane bushings.









