Overview
The Energy Suspension Control Arm Bushing Set in black, part number 2.3103G, is a polyurethane bushing set for the front lower and upper control arms of the 1993 to 1998 Jeep Grand Cherokee ZJ. The existing outer metal shell is reused, so the set replaces only the bushing material inside the original arm housing.
Polyurethane control arm bushings can improve steering response and vehicle control. They help keep caster and camber alignment steady, reduce wheel hop and increase cornering control.
Polyurethane is firmer than factory rubber, so the arm moves less under load. The company ties that firmness to the steering and control benefits described below.
Key features
- Polyurethane bushings for front lower and upper control arms
- Reuse of the existing outer metal shell
- Black finish
- Direct fit for 1993 to 1998 Jeep Grand Cherokee ZJ models
- Manufacturer-stated benefits: steering response, caster and camber, wheel hop
Polyurethane versus factory rubber
Factory rubber bushings absorb small movements well but soften and shift with age. Polyurethane is firmer, so the arm moves less under load. That firmness tends to keep the wheel geometry steadier when the vehicle is cornering or braking, which is why many owners on older Cherokees upgrade these bushings during suspension work.
Because the bushings are firmer, small road noise can carry through the steering and suspension more than before. Lubricate the bushings during installation if the instructions call for it, and listen for squeaks in the first weeks. Check the ball joints and tie rod ends at the same time, since loose parts elsewhere can make the new bushings feel less effective.
- Expect a firmer feel over small bumps
- Inspect the ball joints and tie rod ends together
- Re-check arm bolts after the first drives
Specifications
| Brand | Energy Suspension |
|---|---|
| Part number | 2.3103G |
| Position | Front |
| Location | Lower and upper control arms |
| Material | Polyurethane |
| Color | Black |
| Reuse | Existing outer metal shell |
| Fit | Direct fit |
Vehicle fitment
It fits 1993 to 1998 Jeep Grand Cherokee ZJ models, including 5.9 Limited, Base, Laredo, Limited, Orvis, SE and TSi trims. Grand Cherokee WJ and other Jeep models are not covered. Confirm your vehicle’s year, model and trim before ordering.
Grand Cherokee WJ and other Jeep models are not covered by this ZJ fitment. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Reuse the outer metal shell of each arm. Installation steps are not covered here, so have the arms serviced by someone who has replaced polyurethane bushings before.
What’s included
The front control arm bushing set, black, for the lower and upper arms. Not included: the outer metal shell, which is reused.









