Overview
The Energy Suspension front control arm bushing set in black, part number 5.3105G, covers the upper and lower front control arms on the Dodge vehicles it fits. It fits 1971 to 1978 Dodge B100, B200 and B300 vans, 1972 to 1979 and 1985 to 1989 Dodge D100, 1972 to 1980 Dodge D200, 1971 to 1980 Dodge D300, 1974 to 1993 Dodge Ramcharger and 1980 Dodge RD200.
These sets are sized for the stock arms that stay in place when an aftermarket upper arm is already fitted with polyurethane. Putting polyurethane into those remaining arms brings them to the same bushing material as the aftermarket part.
The polyurethane bushings sharpen steering response, hold caster and camber alignment in place, and help control wheel hop. Reuse all metal hardware, so the existing bolts and brackets go back in with the new bushings.
Key features
- Front upper and lower control arm bushings
- Polyurethane construction
- Reuse all metal hardware with the new bushings.
- Black finish
- Fits 1971 to 1993 Dodge B-series, D-series and Ramcharger models.
Choosing bushings for worn arms
Control arm bushings hold each arm at its pivot points and keep the axle located as the suspension moves. On older Dodge trucks they are often the first parts to wear, because the rubber or urethane ages and the arm begins to shift under braking and cornering. Worn bushings can also show up as wandering steering or uneven tire wear across the front tires.
When choosing a set, match the bushing to the arm position and the vehicle. Where stock arms sit beside an aftermarket arm, using the same bushing material on every arm keeps the front end responding in the same way. Ball joints and tie rod ends are often replaced at the same time, since a loose joint can make new bushings seem less effective.
- Look for cracks, splits and play at each arm
- Replace upper and lower bushings on the same side together
- Check caster and camber after the job
- Watch for uneven tire wear as a sign of worn arms
Specifications
| Brand | Energy Suspension |
|---|---|
| Part number | 5.3105G |
| Position | Front |
| Location | Upper and lower control arms |
| Material | Polyurethane |
| Color | Black |
| Hardware | Reuse all metal hardware |
| Fit | Direct fit |
Vehicle fitment
It fits the Dodge vehicles named above, including the B100, B200, B300, D100, D200, D300, Ramcharger and RD200 trims such as Base, Custom, Pickup Base, Warlock and Sportsman.
Later Ram trucks and Dodge Dakota or Durango models are not in this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Reuse all metal hardware with the new bushings. Match each bushing to its upper or lower arm position before pressing it in.
What’s included
The front upper and lower control arm bushings in black. Not included: metal hardware, which is to be reused.









