Overview
The Edelbrock Performer Plus camshaft and lifter kit, part 2132, is a Dyno Developed camshaft kit for AMC 290, 304, 343, 360, 390 and 401 engines. It comes with matched lifters.
Key features
- Dyno Developed camshaft kit design from Edelbrock
- Matched lifters supplied with the camshaft
- Hydraulic lifter type
- Direct Fit designation, with an RPM range of idle to 5,500
Camshaft break-in and setup
A camshaft sets when the valves open and close and how long they stay open, so it shapes the engine’s idle quality and power band. Changing the cam usually means the valvetrain, timing and fuel delivery must be reviewed together, because a lift or duration change alters how the engine breathes. Hydraulic lifters are quiet and need little adjustment, but they rely on clean oil to keep their plunger movement consistent.
Break-in matters with a new cam and lifters. Follow the procedure in the installation instructions for the kit, use an oil formulated for camshaft break-in, and keep the first start-up at a steady idle long enough for the lifters to pump up. Check for ticking after warm-up, and recheck the valve cover and intake bolts after the first drive.
- Compare the camshaft’s intended use with your cooling and exhaust setup.
- Re-check valve lash only if the lifter type calls for it.
Specifications
| Brand | Edelbrock |
|---|---|
| Part number | 2132 |
| UPC | 85347021321 |
| Lifter type | Hydraulic |
| Duration | 278 int. / 288 exh. |
| RPM range | Idle – 5,500 |
| Engine applications | AMC 290, 304, 343, 360, 390 and 401 |
| Fitment type | Direct Fit |
Vehicle fitment
The kit is matched to AMC engine families: 290, 304, 343, 360, 390 and 401. Match the engine family to your build, and confirm fit for your vehicle’s year, model and trim before ordering.
Check the engine family against your build, and confirm your vehicle’s year, model and trim before ordering.
What’s included
The kit includes the camshaft and matched lifters.









