Select your vehicle

Edelbrock Sure Seat Valve Spring – 5802

Edelbrock

$68.95In stock
Buy on Amazon

See similar parts on Amazon

Price and availability as of Nov 17, 2026 11:30 AM MST, from Amazon.com, and subject to change. The Amazon listing has the current details.

Check out with your Amazon account. Amazon handles delivery and returns.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Edelbrock Sure Seat valve spring, part number 5802
  • Street type, non-rotator design
  • Seat pressure 76-84 lbs, OD 1.222 in, ID 7/8 in
  • For heads with OE 14011416

Description

Overview

The Edelbrock Sure Seat Valve Spring, part number 5802, is a street valve spring with a non-rotator design and seat pressure of 76-84 lbs. It is intended for heads with OE 14011416.

Check the spring’s seat pressure and diameters against your cam and head before installing it.

Key features

  • Street type valve spring
  • Non-rotator design
  • Sure Seat series
  • Seat pressure rated 76-84 lbs

Street spring considerations

Valve springs control how the valve closes and keep it seated against the head. On a street engine, seat pressure is chosen to suit the camshaft’s lift and the engine’s daily use. A spring with too little pressure can allow valve float at higher engine speeds, while too much pressure adds load to the camshaft and lifters.

Springs are normally replaced as a set, along with retainers, locks and seals, so the valvetrain wears evenly. When the head is apart, check the coil bind height, the spring’s squareness and any sign of cracks or discoloration. Heat discoloration on coils is a sign the spring has been overworked.

  • Inspect coils for cracks or heat marks
  • Replace springs as a complete set
  • Check retainers and locks for wear when fitting

Specifications

Brand Edelbrock
Part number 5802
UPC 85347058020
Type Street
Design Non-rotator
Seat pressure 76-84 lbs
Outside diameter (OD) 1.222 in
Inside diameter (ID) 7/8 in
Head application For heads with OE 14011416

Vehicle fitment

This spring is for heads with OE 14011416. Confirm fit for your vehicle’s year, model and engine before ordering.

Confirm your vehicle’s year, model and trim before ordering. Match the seat pressure and diameters to your cam and head specifications.

What’s included

One valve spring is included. Check the package contents against your installation, including any retainers and seals, before starting.

SKU: EDE5802 Category:

Specification

Shipping weight 3.20 lbs
Package dimensions 12.30 × 3.40 × 2.30 in
brands

Questions & Answers

Is the Edelbrock 5802 a non-rotator valve spring?

Yes. The Sure Seat valve spring is a non-rotator design intended for street use, with seat pressure of 76-84 lbs.

What heads does Edelbrock part 5802 fit?

The spring is for heads with OE 14011416. Confirm that number on your cylinder head before ordering, since no year, make, model or engine is named.

What are the outside and inside diameters of the 5802 spring?

The outside diameter is 1.222 in and the inside diameter is 7/8 in. Compare the free height and wire diameter with your original spring before installing it.

Can a non-rotator spring be used with a rotator setup?

Mixing designs is not usually recommended unless the spring is rated for the setup. Non-rotator springs are made for fixed retainers, so confirm the design and seat pressure match your other valvetrain parts before assembly.

How often should valve springs be checked?

Check them whenever the head is removed for service, or if you notice valve noise, misfire or reduced power. Look for broken coils, flattened ends and scuffed surfaces, and replace any spring that shows damage.

Ready to order?

Order this part on Amazon and check out with your Amazon account. Amazon handles delivery and returns.

Buy on Amazon