Overview
The Edelbrock 2162 Performer-Plus is a hydraulic camshaft kit for the 1984 Chevrolet K5 Blazer (Custom). It is a Dyno Developed design that includes matched lifters.
The advertised cam profile is 293 degrees of duration on the intake and 302 degrees on the exhaust, with 0.500 valve lift on both. The stated operating range runs from off-idle to 5500 rpm.
Key features
- Hydraulic lifter design
- Matched lifters included with the kit
- Dyno Developed profile
- Advertised duration of 293 degrees intake and 302 degrees exhaust, with 0.500 valve lift on both
- Off-idle to 5500 rpm operating range
Valve timing basics
Camshaft timing sets when the intake and exhaust valves open and close relative to crankshaft position. Duration describes how long a valve stays open, and lift describes how far it opens. Together they shape the engine’s power curve, so a change in one affects the others and how the engine idles and pulls at higher rpm.
Hydraulic lifters are generally quieter and need less attention than solid designs, and they rely on steady oil pressure. Keep oil and filter changes on schedule, since clean oil keeps the lifters working correctly. After installation, check idle quality and listen for valvetrain noise during the first run.
- Check oil pressure before the first start
- Replace the oil filter after the first run
- Watch for ticking lifters during break-in
Specifications
| Brand | Edelbrock |
|---|---|
| Part number | 2162 |
| UPC | 85347021628 |
| Lifter type | Hydraulic |
| Advertised duration | 293 degrees intake, 302 degrees exhaust |
| Valve lift | 0.500 intake and exhaust |
| Operating range | Off-idle to 5500 rpm |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 1984 Chevrolet K5 Blazer in Custom trim only.
Other model years, trims and vehicles are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Camshaft installation involves valve timing and valvetrain setup, so professional installation and tuning are recommended. Disconnect the battery before starting engine work.
What’s included
The kit includes matched lifters.
Not included: Check the package contents against your installation, including the timing set and gaskets, before starting.









