Overview
The Edelbrock Victor Series Racing Fuel Pump in natural finish, part number EDE1712, is a mechanical fuel pump rated for 130 gph and 10 psi. Edelbrock designed it for high performance and racing engines.
The pump is designed to flow a higher volume of fuel at higher, steadier pressure than a factory pump, which helps guard against fuel starvation. It carries a Universal Fit entry only.
Key features
- Mechanical fuel pump design
- Rated flow of 130 gph
- Rated pressure of 10 psi
- Built for high performance and racing engines, per Edelbrock
Pump placement and feed lines
A racing fuel pump works best when it is mounted low, close to the tank, and fed by a short, clean supply line. Mounting position affects how the pump is cooled and how easily it stays primed during hard cornering or hot starts. Check the hardware and fittings for the layout before cutting or routing any lines.
Pumps that flow more fuel place greater demand on the feed side, so line size and filter restriction both matter. Use fuel-rated hose and clamps, and make sure the pump is wired to a clean, protected supply. After installation, inspect for leaks and confirm steady pressure at idle and under load.
- Mount low and close to the tank
- Fuel-rated hose and clamps
- Filter restriction and line size
- Leak check after first run
Specifications
| Brand | Edelbrock |
|---|---|
| Part number | EDE1712 |
| Pump type | Mechanical |
| Flow rating | 130 gph |
| Pressure rating | 10 psi |
| Finish | Natural |
| Fitment entry | Universal Fit |
Vehicle fitment
It carries a Universal Fit entry only. Verify year, model and trim against your vehicle before ordering.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
Check the mounting hardware and fittings against your installation before starting.
