Overview
The DV8 Offroad rear steel bumper, part RBDR2-03, is a black steel rear bumper for the Ram 2500 and Ram 3500. It is built for 2010 to 2021 models and adds a hard style the factory bumper lacks.
The bumper has built-in steps on the sides, two flush mounted LED cube lights and LED license plate lights. It is compatible with the factory hitch receiver and wiring.
Two dual purpose hooks and the included D-ring shackles prepare the truck for off-road recovery. DV8 says installation is simple and all hardware is included.
Key features
- Built-in steps on both sides
- Two flush mounted LED cube lights
- LED license plate lights
- Two dual purpose hooks
- D-ring shackles included for recovery
Recovery and lighting setup
A rear bumper with recovery hardware changes how a Ram 2500 or 3500 is pulled out of a bind. The two hooks and D-ring shackles are the main recovery points, so match the shackle rating to the load you expect and keep the pins fully seated. Plan the recovery strap or chain before you need it.
Flush mounted cube lights and plate lights wire into the truck’s circuit, so keep the harness protected from the bumper’s edges. Check the lenses for cracks after each trip and clear mud from the lens faces. If the truck will carry a heavier load, recheck the hitch receiver fit and bolt torque at regular intervals. Store the shackles in a dry spot to limit corrosion between trips.
Specifications
| Brand | DV8 Offroad |
|---|---|
| Part number | RBDR2-03 |
| Position | Rear |
| Material | Steel |
| Lights | Two flush mounted LED cube lights and LED license plate lights |
| Recovery | Two dual purpose hooks and D-ring shackles |
| Hitch | Compatible with the factory hitch receiver |
| Hardware | All included |
| Fit style | Direct fit |
Vehicle fitment
It fits 2010 through 2021 Ram 2500 and Ram 3500 models. Ram 1500 models are outside this fit, so check year and model before buying.
Ram 1500 models are not on the list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Installation is simple, and all hardware is included. The bumper works with the factory hitch receiver and wiring.
What’s included
All hardware, the D-ring shackles, the two dual purpose hooks, and the built-in side steps, LED cube lights and license plate lights.














