Select your vehicle

DV8 Offroad Rear Bumper (Black) – RBTT1-01

DV8 Offroad

Shop Toyota Tacoma Bumpers on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Textured black steel rear bumper
  • 3/16 inch steel reinforced with 1/4 inch steel in key areas
  • Two-step powder coat
  • Direct fit for 2005–2015 Toyota Tacoma

Description

Overview

The DV8 Offroad rear bumper, part RBTT1-01, is a textured black steel rear bumper for the 2005–2015 Toyota Tacoma. It is designed to fit 05-15 Tacomas.

DV8 builds the bumper from high tensile strength 3/16 inch steel, reinforced with 1/4 inch steel in key areas, so it can take a beating. The two-step powder coat starts with a thick layer of a corrosion-resistant compound.

The finish is textured black, UV resistant and scratch resistant, and it is designed for long-term use on the vehicle.

Key features

  • 3/16 inch steel reinforced with 1/4 inch steel in key areas
  • Two-step powder coat over a corrosion-resistant compound
  • Textured black, UV resistant and scratch resistant finish
  • Rear position

Trail durability

A rear bumper on a pickup is often the first point of contact when backing into rocks, brush or a trailer hitch, so the steel thickness and the reinforcement in key areas matter. Heavier steel adds weight to the back of the truck, which affects the rear suspension and approach angle. It is worth checking that the bumper clears the tailgate and the spare tire carrier before installation.

Rear bumpers are commonly paired with recovery points, tail light guards and hitch receivers. Keep recovery shackles and straps accessible and inspect the mounting points after hard use. A textured black powder coat hides light scuffs well, but deeper gouges should be cleaned and touched up to keep moisture out of the steel.

  • Check clearance to the tailgate and spare tire before installing
  • Inspect mounts after hard impacts
  • Keep recovery gear within easy reach

Specifications

Brand DV8 Offroad
Part number RBTT1-01
Position Rear
Material High tensile strength steel, 3/16 inch with 1/4 inch reinforcement
Finish Textured black, two-step powder coat
Fit style Direct fit

Vehicle fitment

It fits the 2005–2015 Toyota Tacoma.

Years outside 2005–2015 and other Toyota models are not on the list. Confirm your vehicle’s year, model and trim before ordering.

What’s included

Check the package contents against your installation before starting.

Fitment

VehicleYearsTrims
Toyota Tacoma2005–2015Base, Pre Runner, TRD Pro, X-Runner

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Does RBTT1-01 fit a 2016 Tacoma?

No. The fit covers 2005–2015 Toyota Tacoma models, so 2016 and newer model years are not a fit. Confirm your model year before installing.

What steel is it made from?

High tensile strength 3/16 inch steel, reinforced with 1/4 inch steel in key areas so the bumper can take a beating on the trail.

What is the finish?

A two-step powder coat. A corrosion-resistant compound goes on first, then a textured black, UV resistant and scratch resistant powder coat.

Should the bumper be touched up after an impact?

Yes. Chips that reach bare steel can start rust, so clean the area, dry it and apply a matching touch-up paint. A deeper dent should be checked for cracks around the mounting points.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Toyota Tacoma Bumpers on Amazon